Samsung ME40C User Manual - Touch Screens Inc.

More documents

Recommendations

Info

Connection •• Connection 2 •• Connection 1 RJ45 RJ45 RS232C RS232C RS232C RS232C IN OUT IN OUT IN OUT IN OUT •• Connection 3 RJ45 RS232C RS232C RS232C RS232C OUT IN OUT IN OUT IN OUT 34
Control Codes Viewing control state (Get control command) Header Command ID Data length Checksum 0xAA Command type 0 Controlling (Set control command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value No. Command type Command Value range 10 Video Wall On 0x84 0~1 11 Video Wall <strong>User</strong> Control 0x89 - •• All communications take place in hexadecimals. The checksum is calculated by adding up all values except the header. If a checksum adds up to be more than 2 digits as shown below (11+FF+01+01=112), the first digit is removed. E.g. Power On & ID=0 Header Command ID Data length Data 1 Checksum 0xAA 0x11 1 "Power" Command No. Command type Command Value range 1 Power control 0x11 0~1 2 Volume control 0x12 0~100 Header Command ID Data length Data 1 12 0xAA 0x11 1 1 • • To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. 3 Input source control 0x14 - 4 Screen mode control 0x18 - 5 Screen size control 0x19 0~255 6 PIP on/off control 0x3C 0~1 7 Auto adjustment control (PC and BNC only) 0x3D 0 8 Video wall mode control 0x5C 0~1 9 Safety Lock 0x5D 0~1 35
Page 1 and 2: LFD DISPLAY User Manual ME32C ME40C
Page 3 and 4: Table of contents Main Screen Layou
Page 5 and 6: Table of contents AllShare Play Wha
Page 7 and 8: Chapter 01 Before Using the Product
Page 9 and 10: Storage Due to the characteristics
Page 11 and 12: Do not install the product on an un
Page 13 and 14: Do not use or keep combustible spra
Page 15 and 16: Chapter 02 Preparations Checking th
Page 17 and 18: Checking the Components -- Contact
Page 19 and 20: Parts ―― The colour and shape o
Page 21 and 22: POWER Reverse Side ―― The colou
Page 23 and 24: Remote Control ―― Using other d
Page 25 and 26: Adjusting the OSD with the Remote C
Page 27 and 28: Before Installing the Product (Inst
Page 29 and 30: Installing the Wall Mount Preparing
Page 31 and 32: Remote Control (RS232C) •• Pin
Page 33: •• Connector : RJ45 Direct LAN
Page 37 and 38: Input source control 0x24 HDMI2_PC
Page 39 and 40: PIP On/Off control •• Function
Page 41 and 42: Video Wall On •• Function Turn
Page 43 and 44: Wall_SNo: Product Number code assig
Page 45 and 46: POWER POWER Connecting to a PC •
Page 47 and 48: POWER Connection Using an DP Cable
Page 49 and 50: Changing the Resolution on Windows
Page 51 and 52: POWER POWER Connection Using an HDM
Page 53 and 54: Connecting the network box (Sold se
Page 55 and 56: Changing the Input source Source So
Page 57 and 58: MDC Program Installation/Uninstalla
Page 59 and 60: POWER Using MDC via Ethernet Enter
Page 61 and 62: Connection Management Connection ma
Page 63 and 64: Auto Set ID Auto Set ID feature ass
Page 65 and 66: Command Retry This feature is used
Page 67 and 68: Main Screen Layout 1 6 1 Menu Bar C
Page 69 and 70: User Login User Settings •• Add
Page 71 and 72: MPEG Noise Filter Reduces MPEG nois
Page 73 and 74: Advanced Settings Dynamic Contrast
Page 75 and 76: Format •• Select the format to
Page 77 and 78: Security Safety Lock •• Lock th
Page 79 and 80: Holiday Management Holiday Manageme
Page 81 and 82: Safety Screen The Safety Screen fun
Page 83 and 84: Tool Settings Security •• Panel
Page 85 and 86:
Monitor Window A window appears sho
Page 87 and 88:
Group Management Creating Groups Cr
Page 89 and 90:
Renaming Groups 1 Select a group na
Page 91 and 92:
Troubleshooting Guide -- This progr
Page 93 and 94:
Chapter 05 Screen Adjustment Config
Page 95 and 96:
Screen Adjustment MENUm → Picture
Page 97 and 98:
Position Screen Adjustment Picture
Page 99 and 100:
Resolution Select Screen Adjustment
Page 101 and 102:
Advanced Settings MENUm → Picture
Page 103 and 104:
Advanced Settings White Balance 10p
Page 105 and 106:
Picture Options MENUm → Picture
Page 107 and 108:
Picture Options HDMI Black Level Fi
Page 109 and 110:
Chapter 06 Sound Adjustment Configu
Page 111 and 112:
Speaker Settings MENUm → Sound
Page 113 and 114:
Chapter 07 Network Network Settings
Page 115 and 116:
3 On the dialog that appears, click
Page 117 and 118:
How to set up manually 1 Go to the
Page 119 and 120:
Soft AP AllShare Settings MENU m
Page 121 and 122:
Time MENUm → System → Time →
Page 123 and 124:
Time On Timer Off Timer Holiday Man
Page 125 and 126:
Rotate menu MENUm → System → Ro
Page 127 and 128:
Security MENUm → System → Secur
Page 129 and 130:
Auto Protection Time MENUm → Syst
Page 131 and 132:
Screen Burn Protection Pixel Shift
Page 133 and 134:
Ticker MENUm → System → Ticker
Page 135 and 136:
Video Wall Video Wall · Format ·
Page 137 and 138:
General MENUm → System → Genera
Page 139 and 140:
General Sound Feedback Auto Power S
Page 141 and 142:
Anynet+ (HDMI-CEC) Anynet+ (HDMI-CE
Page 143 and 144:
Problem The connected device is not
Page 145 and 146:
Magic Clone MENUm → System → Ma
Page 147 and 148:
Chapter 09 Support Software Update
Page 149 and 150:
AllShare Play MENU m → Support
Page 151 and 152:
Compatible devices with AllShare Pl
Page 153 and 154:
Connecting to a PC over a network P
Page 155 and 156:
Using the Basic AllShare Play Featu
Page 157 and 158:
My list MENUm → Support → Conte
Page 159 and 160:
Photos MENUm → Support → Conten
Page 161 and 162:
Videos / Photos / Music Play Option
Page 163 and 164:
Supported Subtitle and AllShare Pla
Page 165 and 166:
File Extension Container Video Code
Page 167 and 168:
Contents File Extension Container V
Page 169 and 170:
Flash •• Compatible with Flash
Page 171 and 172:
Approving a connected device from t
Page 173 and 174:
MagicInfo Lite 2 Select Network sch
Page 175 and 176:
USB Device Auto Play MagicInfo Lite
Page 177 and 178:
4 Select Contents to specify the co
Page 179 and 180:
3 Select Edit. Edit Time 12:00 am~
Page 181 and 182:
Viewing the details of a Local sche
Page 183 and 184:
Content manager 2 Select the conten
Page 185 and 186:
Settings Settings Server Network Se
Page 187 and 188:
When Content is Running Viewing the
Page 189 and 190:
Chapter 12 MagicInfo Premium S - -
Page 191 and 192:
Flash Power Point PDF •• Compat
Page 193 and 194:
Network Schedule Multiframe Playbac
Page 195 and 196:
Approving a connected device from t
Page 197 and 198:
MagicInfo Premium S 2 Select Networ
Page 199 and 200:
Internal Auto Play Network schedule
Page 201 and 202:
4 Select Contents to specify the co
Page 203 and 204:
3 Select Edit. Edit Time 12:00 am~
Page 205 and 206:
Viewing the details of a Local sche
Page 207 and 208:
Template Manager 2 Select Create in
Page 209 and 210:
5 Select sound or background music.
Page 211 and 212:
Deleting content 1 Select Content m
Page 213 and 214:
Default content duration Specify th
Page 215 and 216:
Changing the settings for the conte
Page 217 and 218:
Video •• 3D video is not suppor
Page 219 and 220:
MagicInfo Videowall S MENUm → Sup
Page 221 and 222:
Chapter 14 Troubleshooting Guide Re
Page 223 and 224:
Screen issue The screen is not clea
Page 225 and 226:
Sound issue There is no sound. Chec
Page 227 and 228:
Other issue The product smells like
Page 229 and 230:
Q & A Refer to the user manual for
Page 231 and 232:
Chapter 15 Specifications 1 Size Ge
Page 233 and 234:
―― Plug-and-Play This monitor c
Page 235 and 236:
Preset Timing Modes -- Horizontal F
Page 237 and 238:
Chapter 16 Appendix Contact SAMSUNG
Page 239 and 240:
LATIN AMERICA PUERTO RICO 1-800-682
Page 241 and 242:
EUROPE ROMANIA 08008 SAMSUNG (08008
Page 243 and 244:
ASIA PACIFIC PHILIPPINES 1-800-10-S
Page 245 and 246:
AFRICA SOUTH AFRICA 0860-SAMSUNG (7
Page 247 and 248:
WEEE Correct Disposal of This Produ
Page 249 and 250:
Prevention of Afterimage Burn-in Bl
Page 251 and 252:
Licence Manufactured under licence
show all

Samsung ME40C User Manual - Touch Screens Inc.

Create successful ePaper yourself

Delete template?

Save as template?