AT Command Reference - Stollmann
AT Command Reference - Stollmann
AT Command Reference - Stollmann
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Stollmann</strong><br />
E+V GmbH<br />
BlueRS+ - SPP<br />
<strong>AT</strong> <strong>Command</strong> <strong>Reference</strong><br />
&K<br />
Flow Control<br />
<strong>AT</strong> syntax:<br />
<strong>AT</strong>&K<br />
This command determines the flow-control behavior of the BlueRS+ during the data<br />
communication phase.<br />
Mode<br />
Description<br />
0 No local flow control between the DTE and BlueRS+<br />
3 Local flow control is set to hardware handshake RTS/CTS<br />
5 Hardware flow control RTS/CTS in data mode and in command mode<br />
6 Inverted RTS state is signaled to remote host as RI<br />
&R<br />
CTS Control<br />
<strong>AT</strong> syntax:<br />
<strong>AT</strong>&R<br />
This command determines the behavior of the CTS control line of the BlueRS+.<br />
Mode Description<br />
0 CTS follows RTS<br />
1 Hardware flow control RTS/CTS, CTS is always ON if flow control is disabled<br />
2 CTS follows DTR<br />
3 CTS follows remote CTS<br />
&S<br />
DSR Control<br />
<strong>AT</strong> syntax:<br />
<strong>AT</strong>&S<br />
This command determines the behavior of the DSR control line of the BlueRS+.<br />
Mode Description<br />
0 DSR always ON<br />
1 DSR ON indicates a Bluetooth connection<br />
2 DSR follows DTR<br />
3 DSR follows DCD<br />
4 DSR follows remote DSR<br />
5 DSR Off Hook<br />
&V<br />
Display Configuration<br />
<strong>AT</strong> syntax:<br />
<strong>AT</strong>&V<br />
This command displays the current configuration of the BlueRS+.<br />
Author: ta Date of Saving: 18.01.07 Ref: BlueRS+_<strong>AT</strong>_<strong>Command</strong>_<strong>Reference</strong>.doc Revision: 2.02 Page 10 of 54