AT Command Reference - Stollmann
AT Command Reference - Stollmann
AT Command Reference - Stollmann
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Stollmann</strong><br />
E+V GmbH<br />
BlueRS+ - SPP<br />
<strong>AT</strong> <strong>Command</strong> <strong>Reference</strong><br />
Mode Mode name Description<br />
0 bondable Passive mode - accept bond request from the remote device, no active<br />
authentication<br />
1 bond unknown Perform authentication on connection setup; if not bonded with the remote<br />
device, perform bonding<br />
2 bond always Always perform bonding<br />
3 bonded only Accept only connections from bonded devices; authenticate the link<br />
authorization<br />
4 rebond always Accept only connections from bonded devices; always perform bonding<br />
5 do not connect Do not connect<br />
6 refuse pairing Passive mode - the device does not initiate security procedures and<br />
accepts authentication but no bonding (PIN level authentication) from the<br />
remote end<br />
7 refuse security Passive mode - the device does not initiate security procedures and does<br />
not accept authentication or bonding (PIN level authentication) from the<br />
remote end<br />
BSECOUT<br />
<strong>AT</strong> syntax:<br />
Configurator syntax:<br />
Authorization Mode for Outgoing Connection<br />
<strong>AT</strong>**BSECOUT | <strong>AT</strong>**BSECOUT=<br />
bsecout | bsecout=<br />
This parameter configures the authorization behavior of the BlueRS+ for outgoing<br />
connections.<br />
Mode Mode name Description<br />
0 bondable Passive mode - accept bond request from the remote device, no active<br />
authentication (default)<br />
1 bond unknown Perform authentication on connection setup; if not bonded with remote<br />
device perform bonding<br />
2 bond always Always perform bonding<br />
3 bonded only Accept only connections to bonded devices; authenticate the link<br />
authorization<br />
4 rebond always Accept only connections to bonded devices; always perform bonding<br />
5 do not connect Do not connect<br />
6 refuse pairing Passive mode - the device does not initiate security procedures and<br />
accepts authentication but no bonding (PIN level authentication) from the<br />
remote end<br />
7 refuse security Passive mode - the device does not initiate security procedures and does<br />
not accept authentication or bonding (PIN level authentication) from the<br />
remote end<br />
BSIZE<br />
Block Size<br />
<strong>AT</strong> syntax:<br />
Configurator syntax:<br />
<strong>AT</strong>**BSIZE | <strong>AT</strong>**BSIZE=<br />
bsize | bsize=<br />
Author: ta Date of Saving: 18.01.07 Ref: BlueRS+_<strong>AT</strong>_<strong>Command</strong>_<strong>Reference</strong>.doc Revision: 2.02 Page 28 of 54