AT Command Reference - Stollmann

Stollmann
E+V GmbH
BlueRS+ - SPP
AT Command Reference
Bit 2 1 0 Function
0 0 1 ENABLE_SWITCH
1 0 0 ENABLE_SNIFF
Examples:
at**blinkp=1
at**blinkp=4
at**blinkp=5
Device processes role switch from remote device
Device processes sniff requests from remote device
Device processes role switch and sniff requests from remote device
BNAME
Local Device Name
AT syntax:
Configurator syntax:
AT**BNAME | AT**BNAME=
bname | bname=
This command allows the modification of the local device name. The device name is
shown on a remote Bluetooth device during device/service discovery.
The device name can contain a format string to include the device’s own address or
parts of it in the name.
Format: "%[][]a"
“%” Identifier start format string
Character separator on byte order (optional)
Number (1-12) of digits included in device name (optional, default is 4)
“a”
Identifier end format string
Examples: Device address = "0123456789AB"
at**bname=BlueRS+E %:4a Display on remote end: BlueRS+E 89:AB
at**bname=BlueRS+E %4a
at**bname=BlueRS+E %:3a
at**bname=BlueRS+E %3a
at**bname=BlueRS+E %:12a
Display on remote end: BlueRS+E 89AB
Display on remote end: BlueRS+E 9:AB
Display on remote end: BlueRS+E 9AB
Display on remote end: BlueRS+E 01:23:45:67:89:AB
BND
AT syntax:
Configurator syntax:
AT**BND=[,PIN]
bnd=[,PIN]
Bond With a Bluetooth Device
This command initiates a bonding process with a remote Bluetooth device.
can either be the device address of the remote device or the dxx device selector
from the binqlist.
The optional parameter is the passkey used to generate the bond. If is
omitted, the passkey configured with the AT**BPIN command is used.
If the bonding succeeds BlueRS+ returns “SUCCESS”, otherwise “FAILED”.
Author: ta Date of Saving: 18.01.07 Ref: BlueRS+_AT_Command_Reference.doc Revision: 2.02 Page 20 of 54