AT Command Reference - Stollmann
AT Command Reference - Stollmann
AT Command Reference - Stollmann
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Stollmann</strong><br />
E+V GmbH<br />
BlueRS+ - SPP<br />
<strong>AT</strong> <strong>Command</strong> <strong>Reference</strong><br />
SHOWALL<br />
Show All Parameter Settings<br />
<strong>AT</strong> syntax:<br />
Configurator syntax:<br />
<strong>AT</strong>**SHOWALL<br />
showall<br />
This command displays all accessible parameters.<br />
TXFTO<br />
<strong>AT</strong> syntax:<br />
Configurator syntax:<br />
<strong>AT</strong>**TXFTO | <strong>AT</strong>**TXFTO=<br />
txfto | txfto=<br />
Time Before Discarding Tx Data<br />
This command defines the timeout (in 50 ms steps) before discarding remaining Tx<br />
online data at the UART after the Bluetooth link is disconnected. It is only applicable<br />
if hardware flow control is enabled (<strong>AT</strong>&K=3).<br />
Value<br />
Description<br />
0 Tx data is never discarded<br />
20 Tx data is discarded after 1 second<br />
n=1…65535 Tx data is discarded after n*50 ms (n is decimal value)<br />
Note: This command is a hidden parameter and must be enabled using the<br />
<strong>AT</strong>**ENHANCED ABCDEF command.<br />
TXFWD<br />
<strong>AT</strong> syntax:<br />
Configurator syntax:<br />
<strong>AT</strong>**TXFWD | <strong>AT</strong>**TXFWD=<br />
txfwd | txfwd=<br />
Timer for Data Forwarding<br />
If characters were entered, but no additional characters are entered within the<br />
defined period, the serial data already received will be transmitted via the Bluetooth<br />
link.<br />
Value<br />
Description<br />
0 Data will be forwarded after 4 bytes’ worth of data timeout (time depends on serial<br />
speed)<br />
n=1…65535<br />
Delay time n*10 ms (n is decimal value)<br />
V<br />
Result Message Format<br />
<strong>AT</strong> syntax:<br />
<strong>AT</strong>V<br />
This command determines the format of the result messages.<br />
Author: ta Date of Saving: 18.01.07 Ref: BlueRS+_<strong>AT</strong>_<strong>Command</strong>_<strong>Reference</strong>.doc Revision: 2.02 Page 44 of 54
Change language