Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

Radio Frequency
www.techrentals.com.au
Communication Test Sets cont’d.
Aeroflex IFR 3500A Radio Communications Test Set
IFR,3500A (2360)
AU
Communications service monitor. Portable radio test set
for AM, FM, P25, DMR and NXDN radio transceivers,
antenna and cable testing in vehicle, at remote locations
or on bench testing. Frequency range 2M to 1GHz. 20W
power handling without external attenuator. Includes
spectrum analyser, oscilloscope, tracking generator and
75W 6dB attenuator.
Distortion Analysers
Agilent/HP 8903B Audio Analyser
HP,8903B (3020)
AU
Audio analyser for communications and other applications. Measures
distortion, sinad, signal-to-noise, ACV, DCV, frequency. Low distortion
programmable sine wave source. Frequency range 20Hz to 100kHz. Optional
400Hz high pass and CCITT weighting filters fitted.
Power Meters - RF
Agilent/HP E4418B E Series Power Meter
HP,E4418B-001 (2120)
AU
100μW to 25W (-70dBm to 44dBm), 9 kHz to
110 GHz (power sensor dependent ), 4 digit
display - watts, dBm, dB (rel). Battery or mains
powered. Power sensor required, select and
specify when ordering.
Agilent/HP E9300A Power Sensor 1μW to 100mW, 10MHz to 18GHz
HP,E9300A (2125)
AU
Power sensor for HP EPM series power meters. E-series average power
sensor. 10MHz to 8GHz, 1μW to 100mW (-60dBm to 20dBm).
Agilent/HP E9300B Power Sensor 1μW to
25W, 10MHz to 8GHz
HP,E9300B (2135)
AU
Power sensor for HP EPM series power meters.
E-series average power sensor. 10MHz to
18GHz, 1μW to 25W (-30dBm to 44dBm).
Anritsu MA24104A Inline Power Sensor
0.6 to 4GHz, 2mW to 150W
ANR,MA24104A (2115)
AU
A dual path architecture that enables true RMS
measurements over the entire frequency and dynamic
range allowing users to measure CW, multi-tone and
digitally modulated signals such as GSM/EDGE, CDMA/
EV-DO,WCDMA/HSDPA, WiMAX, and TD-SCDMA.
Can be connected directly to a laptop or Site Master with
option 19.
Bird 43 Power Meter
BIR,43
MY
RF thruline power meter. Requires Bird element of specified frequency and
power. Measures forward and reflected power by reversing the element.
Bird RF Element
BIR,ELEMENT-LF
MY
BIR,ELEMENT-HF
MY
RF elements for Bird watt meters. Available in various power and frequency
ranges.
Power Meters - RF cont’d.
Marconi 6970 Digital Power Meter
MAR,6970
MY
NiCd battery operated with digital display. Complete with AC adaptor. Requires
sensor. Sensors available for 10MHz to 26.5GHz frequency range.
Marconi 6910 Power Sensor
MAR,6910
MY
Frequency range 10MHz to 20GHz. Power range -30dBm to 20dBm (1μW to
100mW). Max RF i/p 25dBm (300mW) CW 42dBm (15W) peak for 2μs. Sensing
element semiconductor thermocouple. VSWR 1.25: 10MHz to 30MHz, 1.1:
30MHz to 2GHz, 1.18: 2 to 16GHz, 1.28: 16 to 18GHz, 1.4: typical 18 to 20GHz.
Linearity factor provided with sensor. Accuracy ±0.5% at 25˚C between 10
& 20dBm. Improves by a factor of 10 for each lower range. Calibration factor
provided with sensor. Accuracy uncertainty provided with sensor. Resolution
0.01%. RF connector precision N-type (M) 50Ω.
Marconi 6912 Power Sensor
MAR,6912
MY
Frequency range 30kHz to 4.2GHz. Power range 30dBm (1μW) to 20dBm
(100mW).
Marconi 6913 Power Sensor
MAR,6913
MY
Frequency range 10MHz to 26.5GHz. Power range 30dBm (1μW) to 20dBm
(100mW). Max 25dBm (300mW) CW, 42dBm (15W) peak for 2μs. Sensing
element semiconductor thermocouple. VSWR 1.40: 10MHz to 50MHz, 1.15:
50MHz to 100MHz, 1.10: 100MHz to 2GHz, 1.15: 2 to 12.4GHz, 1.20: 12.4 to
18GHz, 1.25: 18 to 26.5GHz. Calibration factor provided at 1GHz intervals
(500MHz intervals above 20GHz) with each sensor. Accuracy uncertainty
provided with each sensor. Resolution 0.01%. Linearity factor accuracy ±0.5%
at 100mW, decreasing by 0.005% per 1mW.
Marconi 6920 Power Sensor
MAR,6920
MY
High sensitivity diode sensor. Frequency range 10MHz to 20GHz. Power
range -70dBm (0.1nW) to -20dBm (10μW), max 26dBm (400mW) CW
+30dBm (1W) peak for 2μs. Sensing element Shottky barrier diode. VSWR
1.4 to 1.2:10 to 40MHz, 1.20:40MHz to 10GHz, 1.35:10 to 18GHz, 1.40
typical 18 to 20GHz. Calibration factor provided at 1GHz intervals with each
sensor. Accuracy uncertainty provided with each sensor.
Marconi 6923 RF Power Sensor
MAR,6923
MY
High sensitivity diode sensor. Frequency range 10MHz to 26.5GHz. Power
range -65dBm (0.3nW) to -20dBm(10μW), max 26dBm (400mW) CW,
+30dBm (1W) peak for 2μs. Sensing element Shottky barrier diode. VSWR
1.4 10 to 40MHz, 1.15 40 to 100MHz, 1.12 0.1MHz, 1.17 2 to 8GHz, 1.30 8
to 18GHz, 1.50 typical 18 to 26.5GHz. Calibration factor provided at 1GHz
intervals with each sensor. Accuracy uncertainty provided with each sensor.
Resolution 0.01%. Linearity factor provided with each sensor. Accuracy
±1% between -30 to -20dBm. RF connector type N (M) precision 50Ω.
Rohde & Schwarz NRT Power Reflection Meter
RS,NRT (2140)
AU
Measures directional power forward and reverse under operational
conditions. NRT-Z44 sensor included, range 3 mW to 120 W, 200 MHz to
4 GHz. Measurement method is compatible with all common analog and in
particular digital modulation standards. GSM/EDGE, 3GPP (W-/TD-CDMA),
CDMA (IS-95), CDMA2000, PHS, NADC, PDC, TETRA, DECT, DAB,
DVB-T and many more.
18