Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

General www.techrentals.com.au Industrial & Process Management General Industrial & Process Management
www.techrentals.com.au
Industrial Process Calibrators cont’d.
Crystal XP2i 100psi (7 Bar)
NATA with Druck PV411 Hand
Pump
CRY,XP2I CAL KIT 7 (4743)
AU
100psi (7 Bar) pressure gauge and Druck
PV411 hand pump calibration kit. Nata
certified accuracy, ±0.1% of reading
between 20 to 100% of full scale, ±0.02%
of full scale between 0 to 20% of full scale.
Intrinsic and safety ratings registered under
IECEx, ATEX and DNV standards.
Crystal XP2i 5,000psi
(345 Bar) NATA with Druck
PV411 Hand Pump
CRY,XP2I CAL KIT 345 (4765)
AU
5,000psi (345 Bar) pressure gauge and
Druck PV411 hand pump calibration kit. Nata
certified accuracy, ±0.1% of reading between
20 to 100% of full scale, ±0.02% of full scale
between 0 to 20% of full scale. Intrinsic and
safety ratings registered under IECEx, ATEX
and DNV standards.
Druck DPI603 2-NATA 2 Bar Pressure Calibrator
DRU,DPI603-2-NATA (4738)
AU
DRU,DPI603-2
MY
0.075% FS Accuracy includes pump for vacuum and
pressure. Unit will pump up to 2 Bar pressure and
-850mBar vacuum. Measurements can be made to 2 Bar
positive pressure and -1Bar vacuum. The unit has a 24V
energising voltage. Monitors loop current to
55mA DC loop voltage to 50V. Sealed to IP65.
Rechargeable battery operated. Unit can display in 24
different units. BSP 1/8 interface.
Druck DPI603 20 Bar Pressure Calibrator
DRU,DPI603-20
MY
Accuracy 0.075%fs. Pumps up to 20 Bar pressure & -850mBar vacuum.
Measures up to 20 Bar pressure and -1 Bar vacuum. In-built 24V energising
voltage. Monitors loop current to 55mA. Loop voltage to 50V. Interface 1/8”
bsp. Battery operated.
Druck DPI104 350 Bar Pressure Calibrator & HTP1 Hydraulic Pump
DRU,DPI104-350
MY
Range 0 to 350 Bar. Measures 0 to 100mV (1μV resolution), 0 to 5V (0.1mV
resolution), 0 to 50V (1mV resolution) & current 0 to 50mA (1μA resolution) all
@ 0.025% accuracy. Sources 0 to 10V (0.2mV resolution) & 0 to 50mA (1μA
resolution) @ 0.025% accuracy. Voltage output regulated 10V ±0.1%
current 30mA & unregulated supply 24V ±10% current 50mA. Pressure
switch status. Pressure media oil, water & non corrosive gases. Battery
operation 10h or mains operation via charger. Complete with a full range of
pressure connection adaptors.
Druck DPI610-2-NATA 2 Bar Pressure Calibrator
DRU,DPI610-2-NATA (4737)
AU
DRU,DPI610-2
MY
Pneumatic pressure calibrator including pump and
current voltage standard. Pressure range -1 to 2 Bar,
±0.025%fs. Voltage input ±50VDC, ±0.05%rdg,
±0.004%fs. Current input ±55mA, ±0.05%rdg,
±0.004%fs. Temperature -10 to 40°C, ±1 (ambient)
switch open/closed. Voltage output 10VDC, ±0.1% or
24V ±5%. Current output 0 to 24mA ±0.05% rdg ±0.01%fs. Data logger stores
up to 10,000 values. mA ramp configurable. Pressure port G 1/8” (f), includes
flexible hose kit. Pump includes screw adjustment.
Industrial Process Calibrators cont’d.
Druck DPI610-20-NATA 20 Bar Pressure Calibrator NATA Certification
DRU,DPI610-20-NATA (4751)
AU
DRU,DPI610-20
MY
Pneumatic pressure calibrator including pump and current voltage standard.
Pressure range -1 to 20 Bar ±0.025%fs. Voltage input ±50VDC, ±0.05%rdg,
±0.004%fs. Current input ±55mA, ±0.05%, rdg ±0.004%fs. Temperature -10
to 40°C ±1°C (ambient) switch open/closed. Voltage output 10VDC ±0.1%
or 24V ±5%. Current output 0 to 24mA ±0.05% rdg ±0.01%fs. Data logger
stores up to 10,000 values. mA ramp configurable. Pressure port G 1/8f,
includes flexible hose kit. Pump includes screw adjustment.
Druck DPI610-400-NATA 400 Bar Pressure Calibrator
DRU,DPI610-400-NATA (4768)
AU
DRU,DPI610-400
MY
Hydraulic pressure calibrator including pump and current voltage standard.
Pressure range 0 to 400 Bar ±0.025%fs. Voltage input 50VDC, ±0.05%rdg,
±0.004%fs. Current input 55mA, ±0.05%rdg, ±0.004%fs. Temperature -10 to
40ºC ±1ºC (ambient) switch open/closed. Voltage output 10VDC ±0.1% or 24V
±5%. Current output 0 to 24mA, ±0.05% rdg, ±0.01%fs. Data logger stores
up to 10,000 values. mA ramp configurable. Pressure port G 1/8” (f), includes
flexible hose kit. Pump includes screw adjustment.
Druck DPI615-20-NATA 20 Bar
Pressure Calibrator
DRU,DPI615-20-NATA (4750)
AU
Pneumatic pressure calibrator including pump and
current voltage standard. Pressure range 0 to 20
Bar ±0.025% FS. Voltage input ±50VDC ±0.05%
rdg ± 0.004% FS. Current input ±55mA ±0.05%rdg
±0.004%FS. Temperature -10 to 40ºC ±1ºC (ambient)
switch open/closed. Voltage output 10VDC ±0.1%
or 24V ±-5%. Current output 0 to 24mA ±0.05%rdg ±0.01%FS. Data logger
stores upto 10,000 values. mA ramp configurable. Pressure port G 1/8 female,
includes flexible hose. Pump includes screw adjustment.
Druck PV411A Multifunction Hand Pump Kit
DRU,PV411A (4789)
AU/MY
Provides up to 700 Bar hydraulic, 40 Bar pneumatic
pressures and vacuum to -950mBar. Built-in stroke adjuster,
lower pressure fine control and tamper proof overpressure
protection.
Druck UPS III-IS Intrinsically Safe Loop Calibrator
DRU,UPS III-IS (4777)
AU
Measure or source 0 to 24mA and provide 24V loop
power. 50 VDC measurement and continuity. Accuracy
0.015% of reading, Hart compatible. Dual mA and %
readout, linear or flow. It is an essential tool for loop
testing, instrument maintenance and valve set-up, with
an easy-to-read display and simple-to-use time saving
features.
Emerson Process Management 375 Field Communicator
EME,375 (4795)
MY
Will configure, test, and diagnose your HART® and
Foundation FieldBus devices. Able to communicate with any
device, by any manufacturer. Intrinsically safe. Easy upgrade
over the Internet. Interfaces with AMS PC Suite Software.
Emerson 475 Hart Communicator
EME,475 (4794)
AU/MY
Will configure, test, and diagnose your HART® and
Foundation FieldBus devices. Able to communicate with
any device, by any manufacturer. Intrinsically safe. Easy
upgrade over the Internet. Interfaces with AMS PC Suite
Software.
43