Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

www.techrentals.com.au
Physical Measurement
Non-Destructive Testing cont’d.
Phynix Surfix FN Ferrous/Non Ferrous Coating Thickness Tester
PHY,SURFIX FN (4875)
AU
Thickness tester with memory and statistics. Supplied with external probe,
calibration standards and carry pouch. Measurement range 0 to 1,500μm or
0 to 60mils (selectable), tolerance ±1μm +3% of reading, resolution 0.1μm.
Display back light, 4 digit alphanumeric. Min measuring 5 x 5mm, min
substrate thickness type F 0.5mm, type N 50μm. Calibration factory, zero,
foil. Data memory 80 readings max. Interface infra-red download data to PC
utilising hyper terminal.
Wylam Hill Paint Thickness Gauge
WYL,PORTAPAINT
MY
Rugged, fully electronic coating thickness gauges use magnetic and
eddy current principles to measure coating thickness of ferrous metals,
accurately and quickly.
Position Transducers
MEL M5-200 4 to 20mA Optical Position
Transducer
MEL,M5-200 (5315)
AU
Optical distance measurement device 4 to 20mA
output. Will measure distance from 240mm to 440mm
with an accuracy of 0.06mm. Does not require a
reflector on the surface of the device. Light spot
diameter is 10mm. Light sensor is IP67. 4 to 20mA
transmitter is IP40. Will operate from 10 to 30V. Relay outputs indicate error
condition. 1ms, 2ms or 20ms adjustable reaction time. Light source infrared
890nm invisible.
Inclinometers
Gloi ALiSensor Level and
Flatness System
GLO,ALISENSOR (5325)
AU
Precision level system including an iPad with
applications for Straighness, Squareness, Flatness,
Spindle Parallelism, Spindal Perpendicularity, Shaft
Level and Shaft Plumb. Angle can be measured to
.001Deg and flatness can be determined to 0.0025mm.
Includes a magnetic fixture.
Wyler Clinitronic 45 Inclinometer RS-232C
WYL,CL45 (5326)
AU
Resolution 0.01º. Accuracy better than 30arc sec. Display inclination in all
common measurements. Includes RS232 interface for remote display of
inclination and also logging. Settling time