Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

Physical Measurement
www.techrentals.com.au
Material Hardness Testers
Non-Destructive Testing
Micrometers
Position Transducers
Inclinometers
Force Gauges
Load Cells
Weighing & Counting Scales over 8kg
Vibration Analysis
Speed Measurement
Material Hardness Testers
GE DynaMic
Rebound Hardness Tester
GE,DYNAMIC (4936)
AU
Rebound hardness tester tests to ASTM A956 and
DIN 50156. Will compensate for changes in testing
direction. Provides readings in HV, HB, HRC, HRB,
HS, HL & M/mm 2 .
Krautkramer DynaPocket
Rebound Hardness Tester
KRA,DYNAPOCKET (4932) AU
Based on the Leeb’s method HL,
utilising a 3mm tungsten carbide
ball. Other hardness scales can
be selected, HS Shore, HB Brinell, HRB Rockwell B, HRC Rockwell C, HV
Vickers and N/mm 2 tensile strength. Choice of 9 material groups can be
selected, they are St Low-alloy/unalloyed steel and cast steel, ASt Tool steel,
SSt Corrosion resistant steel, GCI Gray cast iron, NCI Nodular graphite cast iron,
AL Aluminium cast alloys, brS Brass, brZ Bronze, Cu Wrought copper alloys.
Proceq Equotip Hardness Tester
PRO,EQUOTIP (4931)
AU
Test probe on a flexible lead. Probe type D is
standard catering for most materials. Measurement
ranges steels 80 to 650HB, 80 to 940HV, 20 to
68HRC, aluminium castings 20 to 160HB, cast iron
90 to 380HB, brass 40 to 170HB & copper wrought
alloys 43 to 315HB. Test hardness must not exceed
940HV. Battery operated.
Non-Destructive Testing
Defelsko 6000 Ferrous & Non Ferrous
Coating Thickness Tester
DEF,POS-6000 (4870)
Ferrous/Non Ferrous metal coating thickness tester with
storage of up to 100,000 readings. Supplied with external
probe, calibration standards and carry pouch. Measurement
range 0 to 1500μm or 0 to 60 mils (selectable). Tolerance
±1μm +1% of reading 0-50μm, ±2μm +1% greater than
50μm. Resolution 0.1μm. Backglow display, HiLo limits audible & visible alerts
when measurements exceed specified limits. Continually displays updates
average, standard deviation, min/max thickness and number of readings while
measuring. Built in USB, Bluetooth and Wifi for downloading readings.
52
Non-Destructive Testing cont’d.
PosiTector 200 B & C Ultrasonic
Coating Thickness Gauge
DEF,POS-200ADV (4880)
AU
Ultrasonic coating thickness gauge with type B & C Probes.
Measures coating thickness over wood, concrete, plastics,
composites etc. Will measure up to 3 individual layer thickness
in a multi-layer system and features a graphic readout. Supplied
with both B, 13 to 1000μm for wood, plastic and composites and
C probes 50 to 3800μm for coatings on concrete, fibreglass
etc. Accuracy is ±2μm +3% of reading.
Defelsko Positest Pull Off Adhesion Tester
for Concrete & Metal
DEF,POSITEST (4895)
AU
Measures the force required to pull a specified test diameter of coating away
from its substrate using hydraulic pressure. Pressure is displayed in both MPa
and PSI on a precision dial indicator and can be related to the strength of
adhesion to the substrate. Suitable for coatings on both metal and concrete
surfaces. Conforms with standards ASTM D4541 and ISO 4624.
Olympus Epoch 600 Flaw Detector
OLY,EPOCH600 (4900)
AU
General purpose ultasonic flaw detector.
Includes UT angle beam transducers 45, 60 & 70º, and Atlas
dual element transducer. Stores images and data to micro
SD card.
Olympus Ultrasonic Thickness Gauge
OLY,38DL (4905)
AU
Operates with dual and single element
transducers, has colour transflective VGA screen. Includes
datalogging capability. Does echo to echo measurements.
Supplied with transducers to measure steel, cast, corroded
steel, rubber, fibreglass and composites. Includes D7906-
SM, M1036, M2008 M109-RM (inc delay line M202-RM)
transducers.
Olympus 26mg Pocket Thickness Gauge
PAN,26MG (4910)
AU/MY
Range 1 to 500mm, fast min mode. Resolution 0.01mm. Probe operates -20
to 150ºC.
Olympus Ultrasonic Probe for OLY,38DL &
PAN,26MG
OLY,D790-SM (4909)
AU
Ultrasonic high temperature probe for PAN,26MG & OLY,38DL. 5MHz 7.9mm
tip diameter. Operating temperature range -20 to 500ºC.
PCWI 30kVDC Porosity (Holiday) Detector
PCW,DC30 (4885)
AU
DC Porosity (Holiday) detector. Detects pinholes in coatings above 150um
on metal substrates such as pipes and tanks. 0-30kV, 3.5 digit LCD display
with battery indicator, display of voltage level. Alarm indicated on front panel,
supplied with rechargeable battery, 10h charger, probe handle with neon
and 2m length cable, 60mm connector for flat brushes, 7m earth cable with
clamp, fan brush, 250mm flat brass wire brush, 450mm probe extension. Dry
conditions.
PCWI 40kV Pulse Porosity (Holiday) Detector
PCW,P40-PULSE (4890)
AU
Pulse porosity (Holiday) detector. Detects pinholes
in coatings and wrapping above 150μm on metal
substrates such as pipes and tanks. Can be used
on dry or wet surfaces. 0 to 40kV output, 4 digit
LED display of voltage, alarm sensitivity setting
between dry and wet. Supplied with rechargeable battery, 10h charger, red
probe handle and 2m length of rubber coated cable, 60mm connector for flat
brushes, 7m earth cable with clamp, fan brush, 250mm flat brass wire brush,
450mm probe extension and 80mm probe extension.