Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals
Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals
Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Data & Telecommunications<br />
www.techrentals.com.au<br />
LAN Cable Testers<br />
LAN/WAN Analysers<br />
PDH/SDH Analysers<br />
DSL/POTS Test Set<br />
Light S<strong>our</strong>ces & Power Meters<br />
Fusion Splicers<br />
OTDR & Fibre Inspection<br />
Fibre Optic Launch Cables & Patch Leads<br />
LAN Cable Testers cont’d.<br />
Fluke DTX-SFM2 Single<br />
Mode Fibre Adaptor for<br />
DTX Cable Analyser<br />
FLU,DTX-SFM2 (3265)<br />
AU/MY<br />
DTX1200/1800 single mode fibre interface.<br />
Use for testing fibre installations in local area networks. Fits in the slot<br />
on the back of DTX cable analyser (standard copper cable adaptors can<br />
be connected but not used simultaneously). Provides fibre testing and<br />
certification. Bi-directional testing at 1310nm and 1550nm at the same<br />
time. Measures optical power loss, length, and propagation delay for single<br />
mode fibres. Pass/fail results based on common fibre standards. SC optical<br />
connectors. Includes in built visual fault locator. (VFL)<br />
LAN Cable Testers<br />
Fluke DSX-5000 Cable<br />
Analyser 1 GHz Class FA<br />
FLU,DSX-5000 (3278) AU<br />
1GHz cable analyser copper test solution enables<br />
testing and certification of twisted pair cabling for up<br />
to 10 GigE deployments and will certify shielded and<br />
unshielded structured cabling systems Cat 3, 4, 5, 5e, 6, 6A, Class C, D, E,<br />
EA, F, and FA at Level V accuracy. 9 second Cat 6 autotest. Built in Alien<br />
Crosstalk testing capability. LinkWare PC reporting software included.<br />
Fluke DTX1800 Cable Analyser<br />
900MHz Cat 7<br />
FLU,DTX1800 (3260)<br />
AU/MY<br />
Category 7 cable certification tester up to 900MHz.<br />
Tests to Category 3, 4, 5, 5E, 6, 6a and 7. Cable analyser<br />
for use with shielded and unshielded twisted pair Cat 6<br />
Autotest time of 12 seconds. Linkware PC software, and<br />
USB cable included. Internal memory stores results.<br />
Optional multimode & single mode OTDR module.<br />
Fluke DTX-MFM2 Multimode Fibre<br />
Adaptor for DTX Cable Analyser<br />
FLU,DTX-MFM2 (3270)<br />
AU/MY<br />
DTX1200/1800 multimode fibre interface. Tests<br />
fibre installations in local area networks. Fits in the<br />
slot on the back of DTX cable analyser (standard<br />
copper cable adaptors can be connected but not used simultaneously).<br />
Provides fibre testing and certification. Bi-directional testing at 850nm<br />
& 1300nm at the same time. Measures optical power loss, length, and<br />
propagation delay for multimode fibres. Pass/fail results based on common<br />
fibre standards. Includes in built visual fault locator. (VFL).<br />
Fluke DTX Compact OTDR SM-MM<br />
FLU,DTX-OTDR (3280)<br />
AU<br />
Full featured multimode & single mode OTDR module<br />
that snaps onto a DTX Cable Analyser. Shoots and analyses<br />
traces on single mode 9nm and multimode 62.5 & 50nm fibre.<br />
Fluke DTX Permanent Link Adaptor Analyser<br />
FLU,DTX-PLA (3295)<br />
Fluke PLA001 Permanent Link Adaptor.<br />
Fluke DTX Fibre for DTX Cable Analyser<br />
FLU,DTX-SFM<br />
MY<br />
DTX1200/1800 singlemode fibre interface. Tests fibre installations in local<br />
area networks. Fits in the slot on the back of DTX cable analyser (standard<br />
copper cable adaptors can be connected but not used simultaneously).<br />
Provides fibre testing and certification. Bi-directional testing at 1310nm<br />
& 1550nm at the same time. Measures optical power loss, length, and<br />
propagation delay for singlemode fibres. Pass/fail results based on<br />
common fibre standards. SC optical connectors. Includes in built visual<br />
fault locator (VFL).<br />
AU<br />
20<br />
LAN/WAN Analysers<br />
EXFO AXS-200-850 Ethernet Test Set<br />
EXF,AXS-200_850 (3228)<br />
AU<br />
Two AXS-200/850(s) for installing, tuning up or maintaining<br />
Ethernet and IP services up to 1Gbit. Bidirectional RFC<br />
2544 testing. Applications include performance assessment<br />
of Carrier Ethernet services, activation and maintenance<br />
of metro Ethernet networks, deployment of active Ethernet<br />
(point-to-point) access services, traffic generation and<br />
monitoring for network performance testing Bit-error-rate testing (BERT)<br />
up to layer 4. Pass/fail results with user-defined thresholds. QoS, ToS and<br />
diffserv capabilities. Copper and SM & MM fibre interface supplied.<br />
EXFO ETS-1000L 10/100/1000 Ethernet Loopback<br />
EXFO,ETS-1000L<br />
MY<br />
Ethernet/Gigabit ethernet loopback unit ETS-1000L is intended for performing<br />
loopback at the physical, data link, network and transport layers of the OSI<br />
model. It allows carrying out loopback control via OAM protocol and remote<br />
control via TELNET protocol.<br />
EXFO FTB-860G NetBlazer<br />
10G Ethernet Tester<br />
EXF,FTB-860G (3223)<br />
AU<br />
Performs 10 Gbps RFC 2544 measurements<br />
and EtherSAM (ITU-T Y.156sam), for turnkey<br />
deployment, validation, and troubleshooting of<br />
access and metro ethernet services. IPv6 testing capabilities BERT, RFC,<br />
traffic gen and through mode. NetBlazer offers GUI navigation, dedicated<br />
quick-action buttons, and clear notifications for accurate interpretation of<br />
test results.<br />
Fluke Networks Etherscope II Gigabit LAN<br />
Analyser<br />
FLU,ETHERSCOPE-EX (3226)<br />
AU<br />
10M/100M/1Gigabit Copper, Fibre and WLAN a/b/g<br />
network analyser. Discover network elements<br />
and fault location even in a switched environment.<br />
IP analysis of Carrier Ethernet services. VLAN<br />
discovery, connected host details and trending data. Document and report<br />
network performance. View detailed information about RF signal strength, APs,<br />
SSID, channel information and more. Cable ID accessory for tracking cable<br />
routes included.<br />
Fluke Optiview Pro Gigabit 10/100/Gigabit LAN<br />
Analyser<br />
FLU,OPTIVIEW-GIG (3227)<br />
AU<br />
Provides network analysis on 10/100/Gigabit ethernet<br />
networks (multimode fibre & copper). Features active<br />
discovery in switched networks, full 7 layer analysis,<br />
ITO (Internetwork Throughput Option), trace switch<br />
route, free string match, reporting and documenting, address-to-name<br />
mapping, packet capture and decode, SNMP device analysis, RMON II traffic<br />
analysis, application level traffic analysis and much more.