Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

Electrical Power
www.techrentals.com.au
Power Analysers, Loggers
& Recorders cont’d.
CHK GridSense PowerMonic PM40
Power Quality Analyser
CHK,PM40PQA (8708)
AU
Weatherproof IP65 field unit. Channels: 3 Voltage,
63 to 440V (isolated). 4 current 0 to 3,000A (3ph
and neutral) RMS. Supplied with 4 flexible 3,000A
clamp-on CTs (flexible CT length 600mm and Diameter
190mm). Memory: 15Mb. Inbuilt Graphic 128x64 bits
LCD display, 7 rows x 20 characters. Records: V, A,
pf, f(Hz), kVA, kVAr, kW, harmonics, Inter harmonics,
voltage and current imbalance (THD and individual to
48th ) and Flicker. Total energy, tariffs, maximum demands, and transient and
sub-cycle disturbances. Included software provides graphs and summaries to
PC. Download files while logging USB interface. A PC using Windows 95, 98,
NT4, WIN2000 or XP O/S, is required with the CHK PowerView software to
configure this unit before operating.
CHK GridSense PowerMonic PM45
Power Quality Analyser
CHK,PM45 (8709)
AU
Suitable for low voltage investigations,
power profiling and load studies, harmonic analysis,
power factor studies & flicker and imbalance
monitoring. Features IEC61010 Cat IV 600V safety
certificate, weatherproof IP65 case, 4 channel
voltage and 4 channels current. Supplied with 4 x
Flexi F3000-6 clamps. VA,B & C 0 to 600VAC VGnd
0 to 60VAC, Current input 0 to 3,000A.
Dranetz-BMI Power Guide 4400
DRA-BMI,PG4400 (8715) AU
Provides the full range of
measurements including V, I, W, VA, VAR,
TPF, DPF, demand, energy, harmonics &
inter-harmonics, THD, harmonics spectrum
(V, I, W) to the 63rd, flicker (Pst, Plt), crest
factor, K factor, transformer de-rating etc. Asset comes with AC flexible
current clamp DRA-BMI,RR3035A/24, current range 30/300/3,000A AC only.
Can be extended to different ranges of measurement AC/DC by selecting
appropriate current clamps. Has the full range of arithmetic, vector and
sequence parameters to evaluate distorted and un-balanced loads as defined
in IEEE 1459. Exceeding high/low limits of any active parameter can trigger
logging. Voltage & current disturbances. DRA-BMI,PG4400 analysers can be
used for power quality measurements, current inrush fault recording long term
monitoring and continuous logging at 1s intervals. DRA-BMI,PG4400 is Class
A compliant with IEC Standard 61000-4-30, AS61000-4-7 and AS61000-4-15.
Dranetz-BMI Power Xplorer PX5
DRA-BMI,PX5 (8716)
AU
Provides the full range of
measurements include V, I, W, VA, VAR, TPF, DPF,
Demand, Energy, Harmonics & Inter-harmonics,
THD, Harmonics spectrum (V, I, W) to the 63rd,
Flicker (Pst, Plt), Crest factor, K factor, Transformer de-rating etc. Min/Max/
Avg values are determined in 1/2 cycle RMS steps. Complete with A/C Flexible
Current Clamp DRA-BMI,RR3035A/24, Current Range: 30/300/3,000A AC
only. Can be extended to mentioned different ranges of measurement both
AC/DC by selecting appropriate current clamps. High-speed transient capture
(1MHz sampling rate). Pre-event and post-event waveform capture cycles are
user adjustable. Can be used for power quality measurements, current inrush
(cycle-by-cycle current logging), fault recording (cycle-by-cycle voltage
logging), long term monitoring and continuous logging at 1s intervals.
Compliant with IEC Standard 61000-4-30 (Class A), AS61000-4-7 and
AS61000-4-15.
Power Analysers, Loggers
& Recorders cont’d.
Fluke 345 Power Quality
Clamp Meter
FLU,345 (8739)
AU
For measurements on switching loads such as variable frequency
drives, electronic lighting and UPS systems. Low-pass filter and
high EMC immunity design make unit ideal for noisy environments.
600V CAT IV rated, 1400A AC, 2000A DC. Measure and log
harmonics, inrush current and ripple current on battery systems.
Analyse data and generate reports with included Power Log
software.
Fluke 435 3-Phase
Power Quality & Energy
Analyser
FLU,435 (8738)
AU/MY
Power Quality Analyser to suit a broad range of ac
mains studies. Includes 4 x 600/6000A ac CTs. A
unique energy loss calculator provides the ability to
monetarily quantify energy losses. Supplied with Fluke
Power Log Software for detailed data analysis and report
generation.
Fluke 1735 3-Phase Power Logger
FLU,1735 (8737)
AU/MY
Measures single-phase to 3-phase 4-wire
circuits, 50/60Hz. 3 voltage inputs with common
neutral rated 600Vac (CAT III 600V). 4 current inputs,
4 flexible current probes (15A to 3000A) are included.
Records voltage, current, power (P, Q & S), power factor, frequency, energy
consumption, averaged demand, harmonics (odd up to 25th order), THD
(voltage & current). Includes built-in batteries for up to 12 hours of recording,
and includes Fluke Power Log software.
Fluke VR1710 Single-Phase Voltage
Quality Recorder
FLU,VR1710 (8720)
AU
Single phase power quality analyser. Records RMS,
transients, flicker & harmonics up to the 32nd. Selectable
logging periods from 1s to 20min. Provides continuous
recording with no gaps. Includes software for download,
analysis and automatic reporting.
Hioki 3169-21 Clamp-On
Power HiTester with
4 x 500A CTs
HIO,3169-21 CT500AMP (8726) AU
Measures voltage, current, power,
power factor, harmonics and integrated
values. Simultaneously performs demand
measurements required for power management and energy-saving. Range
0.05A to 500A. Includes 4 x clamp-on CTs. Supplied software provides graphs
and summaries to PC. Flash card data storage. RS232 interface for PC
communications.
Hioki 3169-21 Clamp-On Power HiTester with 4 x 1,000A CTs
HIO,3169-21CT1000AMP (8727)
AU
Measures voltage, current, power, power factor, harmonics and
integrated values. Simultaneously performs demand measurements required
for power management and energy-saving. Range 5A to 1000A. Includes 4
x clamp-on CTs. Supplied software provides graphs and summaries to PC.
Flash card data storage. RS232 interface for PC communications.
28