Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

General Industrial & Process Management
www.techrentals.com.au
Strip Chart Recorders cont’d.
Yokogawa DR130 Hybrid 20 Channel Recorder FDD
YEW,DR130 (4010)
AU
Input unbalanced floating 20mV~50VDC, TC, RTD and contact. Accuracy
0.05%. Reads 20 channels in 2s. Recording width 150mm. Data can be saved
to 500k of internal RAM either directly or due to alarm conditions. The saved
data can be copied to a 3.5” FDD file suitable for inclusion in standard spread
sheet programmes.
High Speed Waveform Recorders
Hioki 8835-HD520 520Mb PCMCIA Hard Disk for HIO,8835 & 8841
HIO,8835-HD520 (4122)
AU
PCMCIA interface complete with 520Mb card. Data can be stored in several
formats: as a binary memory file for replay on the recorder; as a CSV text file
compatible with Excel; as a BMP screen dump for a Word document, etc; as
a single or dual FFT binary file for replay on the recorder. The recorder setup
can be saved for future applications requiring the same settings. Data media
is PCMCIA Type III compatible with many laptop computers.
Hioki 8841 8 Analogue, 16
Channel Memory Recorder
HIO,8841 (4117)
AU
Memory 12bits x 4 megawords/ch
for 2 analogue ch, to 1 megawords/
ch for 8ch. In-built FDD, type III
PCMCIA card slot (for flashcard
& HDD up to 520Mb). Sampling rate of 1MHz max. Functions memory,
real time record, RMS, real time/memory, X-Y memory, FFT. Trigger
functions level, window in, window out, voltage drop, RMS level,
cycle, logic pattern trigger 1,0 or X (disregard). When using logic channels,
logic probes must be rented separately. Measurement range 400VDC, 240V
RMS, low pass filters 5Hz, 500Hz, 5kHz or 100kHz, input coupling DC, GND,
AC. Large 10.4” colour TFT display for settings and waveform display, wide
thermal printer fitted. On screen help function. All settings and waveforms
can be saved to media, waveforms can be saved as binary, text or bmp files.
Hioki 8842 16 Analogue, 16
Logic Channel Waveform
Recorder
HIO,8842 (4150)
AU
Memory 12bits x 16 megawords/ch for
2 analogue ch, to 2 megawords/ch for
16 ch. Analogue input channel ranges
10mV to 50V per div, 10X div, 400VDC,
240VAC RMS max. In-built FDD, type III PCMCIA card slot (for flashcard
& HDD up to 520Mb). Sampling rate of 1MHz max. Functions memory, real
time record, RMS, real time/memory, X-Y memory. Trigger functions level,
window in, window out, voltage drop, RMS level, cycle, logic pattern trigger
1,0 or X (disregard). When using logic channels, logic probes must be rented
separately. Measurement range 400VDC, 240V RMS, low pass filters 5Hz,
500Hz, 5kHz, or 100kHz, input coupling DC, GND, AC. Large 10.4” colour
TFT display for settings and waveform display, wide thermal printer fitted.
On screen help function. All settings and waveforms can be saved to media,
waveforms can be saved as binary, text or bmp files.
Hioki 8860 8 Channel High Speed
Memory Recorder
HIO,8860 (4129)
AU
High speed memory recorder, 20MS/s sampling
rate, 8 analogue channels, 16 logic channels,
built in printer. 512MW or direct access memory,
60GB hard drive built-in, PC card type II slot
up to 4GB ATA flash card (optional) USB, LAN
interface and large colour screen.
High Speed Waveform Recorders
cont’d.
Hioki 8870-20 Memory
Hicorder 2 Analogue & 4 Logic
Channels
HIO,8870-20 (4101)
AU
Channels; 2 analogue and 4 logic (standard
equipment, logic grounds are common with
instrument ground), 10mV to 50V/div, 12 ranges, resolution: 1/100 of range,
DC 400V, DC to 50kHz (-3dB). 100μs/div to 5 min/div, 20 ranges, at 100
points/div resolution, three steps of time-axis magnification from 2× to 10×,
and nine steps of time-axis compression from 0.5× to 0.001. MEM (highspeed
recording), 12bits × 2M-Words/ch, CF Card Type I slot × 1, up to 1GB.
Display 4.3 inch WQVGA-TFT colour LCD (480 × 272 dots). One USB 2 high
speed mini-B receptacle: transfers files from the installed CF card to a PC
when connected. Numerical calculation, cursor readout, scaling function,
screen copy, gauge display, waveform data/setting configurations backup,
start condition retention, auto-save, instantaneous value or RMS value display
(only DC and 50/60Hz). Use with the AC adapter, 100 to 240VAC (50/60Hz)
30VA max. Battery pack; continuous use 2h (AC adapter has priority when
both are used). 12VDC supply: 10 to 16V, 10VA Max.
Hioki 8938 FFT Input Signal Module
HIO,8938 (4138)
AU
FFT Module with anti-aliasing filter.
Frequency range DC to 400kHz, sampling rate
1MS/s. Maximum input voltage 400VDC, 240V RMS.
Hioki 9306 4 Channel Contact & Digital Logic Probe
HIO,9306 (4123)
AU
Contact interface for HIO, 8811, 8835, 8835-01, 8841 & 8842 memory
recorders. Threshold digital >1.4V maximum input 50V. Contact closure input,
2k input resistance 30V allowable input. Response time 2μs.
Hioki 9320 4 Channel Contact
& Digital Logic Probe
HIO,9320 (4140)
AU
For HIO, 8811, 8835, 8835-01, 8841 & 8842
memory recorders, 4 channels per probe,
max of 4 probes per recorder. Threshold
digital selectable 1.4V, 2.5V & 4V. Response time 500ns max. Relay dry
contact detection. Max allowable input 50VDC.
Hioki 9321 Line Logic Probe
HIO,9321 (4124)
AU
Four channels (insulated) per probe. Detection of 60
to 150VAC, 170 to 250VAC, 20 to 150VDC & 70 to
250VDC in 2 ranges. Response time slope rise 1ms,
fall 3ms. Max input low range 150V RMS, high range
250V RMS. Max rated voltage to earth 250V RMS.
Connector cable 1.5m. Probe tip cable 1m.
Hioki 9335 Wave Processor Software for Hioki 8835, 8835-01, 8841, 8842
HIO,9335 (4155)
AU
Waveform Processor software, displays, converts to CSV, calculates and
prints waveforms with a PC. Review stored binary files from Hioki 8835,
8835-01, 8841 and 8842 memory recorders. Only way stored binary files can
be viewed on a PC without having to re save them with memory recorder as
text files.
Hioki 9725 Memory Viewer Software
HIO,9725 (4157)
AU
Data processing software for Hioki 8860 High Speed Memory Recorder.
Functions: file loading, maximum loadable data size 2GW file saving,
measurement of data binary, partial saving between A/B cursors is
possible. Screen images BMP and PNG, calculation results. Display of
saved binary files, displayable channels per sheet analogue 32, logic 16
channels. Displayable sheets 16.
46