Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

Construction, Building Services & Survey
www.techrentals.com.au
Concrete Testing Equipment cont’d.
Elcometer 331-SH Cover Meter with Half Cell Measurement
ELC,331-SH (4919)
AU
Displays the depth and orientation of the reo bars. Standard search head.
40mm diameter bar depth 15 to 95mm. 8mm diameter bard depth 8 to
70mm. Rechargeable battery allows 32h of continuous operation (20h with
backlight). Autosizing of bars or orthogonal measuring of bar sizes. Internal
storage of readings of depth of cover in batches which can be downloaded to
PC with supplied software. XP and Vista supported.
Hilti PS20 Rebar, Copper Pipe & Electrical
Cable Locator
HIL,PS20 (4920)
AU
Localise and position of reinforcement, (rebars) copper,
aluminium pipes and unshielded live electric cables. Depth
range for detection of rebars 0 to 100mm, for copper &
aluminium pipes 60mm, rebar diameter 8 to 36mm, depth
detection accuracy 10 to 30mm ±2mm, above 30-60mm
± 2mm ±10% depth, above 60 to 80mm ±5mm ±10% depth, based on 12mm
rebars. Detection of copper & aluminium pipes based on 10 to 30mmØ, only
detection with depth of 0 to 60mm, no depth reading, same for live electric
cables, cannot detect live cables in metal conduit or shielded cables.
Hilti PS200 Ferroscan System
HIL,PS200 FERROSCAN (4921) AU
Portable, quick and easy to
use for detecting rebar and other ferrous objects
in concrete structures. Provides accurate on-site
rebar location, depth and diameter with the PS
200M monitor. Scans can be evaluated on the
monitor or transferred to a PC or laptop for further
evaluation and report generation. Portable wireless operation, easy integrated
LCD display makes setting up the scan easy while providing information
over the scan process. Fast data download via infra red beam from scanner
to monitor. Convenient Scanner stores up to 9 image scans and 30m of
Quickscans.
Hilti PS38 Multidetector
HIL,PS38 (4918)
AU
Designed to detect objects such as ferrous
metals (rebars), non-ferrous metals (copper
and aluminium), wood beams, plastic pipes,
electric cables in dry materials. Detects at depth
up 120mm. Location accuracy ±15mm. Depth
accuracy ±5mm. Minimum distance between
two objects 40mm.
Hilti PS1000 X-scan Concrete GPR
System
HIL,PS1000 (4922)
AU
A GPR system with 3 transmitters and
5 receivers that has been designed to
provide a 3D image of the location of reinforcement bars and other metallic
and non-metallic objects in concrete. Accuracy ±10mm. It will measure to a
depth of 300mm.
Handy Search
NJJ-95B Reinforced
Concrete Radar
JRC,NJJ-95B (4923)
AU
Ground Penetrating Radar (GPR) technology
applied to the location of reinforcement in
concrete. Unit will search to a depth of 300mm.
Display is very easy to interpret (scanned images). Scan information can
be saved to a memory card for transfer to a PC. A 3D image of the slab can
be generated using PC software. Can be used to detect voids in concrete
and the concrete depth is easy to determine from the image. The location
of non-metallic objects can also be determined.
Concrete Testing Equipment cont’d.
Olson FTG Concrete
Thickness Gauge
OLS,CTG (4929)
AU
Concrete thickness gauge utilising the impact
Echo test method. Can measure concrete
thickness in two ranges: 6 to 60cm and up
to 1.8m. This concrete thickness gauge is a
battery operated handheld system for
measuring the flaws and thickness of concrete
slabs, pavements, walls and other plate-like structures from one side. Up
to 300 readings can be stored in the field before the memory is full. RS232
interface and transfer software supplied.
Proceq 2000-ND Digi Schmidt Test
Hammer
PRO,2000-ND (4930)
AU
Concrete hardness tester (Schmidt
hammer). Supplied complete with inbuilt
graphical LCD for setting up and graphical
display of results, up to 500 results can
be stored. RS232 interface and software
supplied for down loading. Impact energy 2.207Nm. Engineering units of
results in N/mm 2 , MPa, psi, kg/cm 2 . For concrete thickness greater than
100mm.
Proceq Profoscope Rebar Locator & Cover Meter
PRO,PROFOSCOPE (4926)
AU
Rebar locator and covermeter. Short range measurements
to 95mm ±3mm accuracy. Long range 185cm accuracy
± 4mm. The unit will determine the position of the rebars, the
mid point between rebars, Concrete cover, estimation of bar
diameter & the orientation of the rebar. Powered by 2 x AA
batteries. Battery life 15h with backlight 55h without.
Proceq Resistivity Meter
PRO,RESIPOD (4925)
AU
Can determine the likelihood of
corrosion and the corrosion rate in concrete. 0
to 1,000kΩ measurement range. USB interface,
USB charging. Waterproof.
Proceq SilverSchmidt UN Concrete
Test Hammer
PRO,SIL-UN (4928)
AU
Requires no corrections for angle of test,
simple one button operation, datalogging
capability with USB download with detailed reporting capability. Impact
energy 2.207Nm. Compressive strength range 10 to 170MPa. Battery Life
>1,000 Impacts before recharging is required.
Protimeter Moisture Measurement System
PRO,MMS-PLUS (4955)
AU
Moisture meter for detection of moisture in non conductive solid materials
such as wood and masonry. Two measurement modes, search for
qualitative measurements and measure mode for precise and localised
moisture content. Supplied with pin type probes, deep wall probes,
hygrometer probe and extension cord for RH, ambient temperature or
dew point temperature. Hygrostick probe supplied for surface temperature
measurement. Logging software and RS232 computer interface supplied.
See also Material Moisture Meters on page 62
60