Download our Equipment Solutions Brochure (14 MB) - Tech-Rentals

General Industrial & Process Management
www.techrentals.com.au
Laser Rotational Shaft Alignment
Industrial Process Calibrators cont’d.
Fixturlaser Dirigo Laser Bases Shaft Alignment System
FIX,DIRIGO (4940)
AU
Measurement resolution to 0.01mm Shaft diameter range 40
to 150mm using an extension chain 150 to 500mm. Maximum
distance between measurement units 0.85m. Very simple to
use and operate as shims are applied the alignment can be
monitored in real time. 20h of operation from alkaline batteries.
Fixturlaser PAT Pulley Alignment System
FIX,PAT (4941)
AU
Laser based alignment system for pulley systems. Measurement accuracy
0.5mm (0.2º). 20hrs of operation on AAA batteries. Mechanically self centres
on pulley, will operate successfully even on worn pulley systems.
MCE Pipe Laying Laser Alignment System
MCE,LS140G (4942)
AU
Pipe laying laser alignment system. Simple
system for setting pipe grades. Applications
include sanitary and storm sewers, tunnelling
and Pipe Jacking. It includes a remote to adjust
the grade and left right alignment. Kit includes
target, remote and legs for different pipe sizes etc. This system uses the
Green laser wich is considerably brighter than a red laser.
Pruftechnik Rotalign Pro Laser Shaft
Alignment Ex
PRU,ROT-PROEX (4943)
AU
Intrinsically safe laser based rotating shaft alignment
system. Maximum separation between emitter and
receiver 10m. Aligns horizontal and vertical machines,
aligns coupled and uncoupled shafts equally well.
Pruftechnik Rotalign Ultra Laser
Shaft Alignment
PRU,ROT-ULTRA (4945) AU
Laser based rotating shaft alignment system.
Maximum separation between emitter and
receiver 10m. Aligns horizontal and vertical
machines, aligns coupled and uncoupled shafts equally well. Ultra modern
computer design, backlit colour display, Intel XScale 400MHz CPU, USB
for peripheral devices, PC, printer, also Bluetooth communication. Backlit
keyboard, rechargeable Li-Ion battery pack. Machine train alignment - 14
machines. Alignment results in 3 quick steps, thermal growth computation.
Rotalign Ultra Reader software included.
Pruftechnik 1500mm Length Tension Chains
PRU,AL12.116 (4946)
1500mm length tension chains for PRU,ROT-ULTRA.
Industrial Process Calibrators
Ametek PPCE 700 Bar Pressure Calibrator
AME,PPCE
MY
High pressure calibrator with pump 700 Bar (10,000psi). Digital display with 5
digit resolution. Accuracy over 70 Bar ±0.07. Accuracy below 70 Bar ±0.35.
Current and voltage measurement ranges 4 to 20mA, 0 to 50mA & 0 to 30V.
AU
Beamex MC5 Multifunction
Calibrator NATA Certified
BEA,MC5 (4731)
AU
NATA certified MC5 provides calibration capability
for pressure, temperature, electrical and frequency
signals. HART communication and CMX light
software provided. Calibration results can be stored
or printed. Performs as a field-entry device (FED)
allowing for the recording of non-calibration related
maintenance results. Pressure modules included, -1 to 20 Bar and 600 Bar
(up to 1,000 Bar with optional external transducers). DC voltage & current,
frequency, and pulse measurement. RTD, thermocouple, and resistance
simulation & measurement.
Beamex MC5-IS Multifunction
Calibrator NATA Certified
BEA,MC5-IS (4732)
AU/MY
NATA certified MC5-IS provides calibration capability
for pressure, temperature, electrical and frequency
signals. HART communication and CMX light software
provided. Calibration results can be stored or printed.
Performs as a Field-Entry Device (FED) allowing for the recording of
non-calibration related maintenance results. Pressure measurement range, -1
to 20 Bar and 600 Bar (up to 1,000 Bar with optional external transducers). DC
voltage and current, frequency, and pulse measurement. RTD, thermocouple,
and resistance simulation and measurement.
Beamex MC6 Advanced Field
Calibrator
BEA,MC6 (4727)
AU
NATA certified MC6 provides calibration
capability for pressure, temperature, electrical
and frequency signals. HART communication and
CMX light software provided. Calibration results
can be stored or printed. Performs as a field-entry device (FED) allowing for the
recording of non-calibration related maintenance results. Pressure modules
included, -1 to 20 Bar and 600 Bar (up to 1,000 Bar with optional external
transducers). DC voltage & current, frequency, and pulse measurement.
RTD, thermocouple, and resistance simulation & measurement. Colour touch
screen.
Crystal nVision Pressure Calibrator 30 Bar
IS NATA
CRY,NVISION-30-NATA (4757)
AU
Intrinsically safe pressure calibrator. Displays real-time
recorded data graphically on a high res screen with ability
to zoom into specific events. 500,000 data point memory
records all data from all enabled screens from two modules
simultaneously. Fastest logging interval 10 readings/sec.
Configured with MA20 current, voltage and switch test module and 30 Bar
pressure module, accuracy to 0.025% of reading. Includes hand pump and
CPF (finger tight to 700 Bar) fittings.
Crystal XP2i 15psi (1 Bar)
NATA with Druck PV411 Hand
Pump
CRY,XP2I CAL KIT 1 (4735)
AU
15psi (1 Bar) pressure gauge and Druck
PV411 hand pump calibration kit. Nata
certified accuracy, ±0.1% of reading between
20 to 100% of full scale, ±0.02% of full scale
between 0 to 20% of full scale. Intrinsic and
safety ratings registered under IECEx, ATEX
and DNV standards.
42