Sony - TSL

2.1.2 Router Source and Bus Mnemonics
Select Edit > Mnemonics > Router Source/Bus.
The Router Source and Bus Mnemonics are entered in exactly the same way using the appropriate menu.
When more than one router is in use, the desired Router is selected at the top of the dialogue box.
2.2 Setting the Displays to be Fixed, Fixed (Router) Source, Router Source, or Router Bus
Displays.
With the mouse pointer over the Display select the RH button. Select Set Mnemonic.
For example: If this Display is to be associated with a Router Bus, select the Router Bus option. Then select
both the Router and Bus with which the Display must be associated.
This will allow selection of
the Router number (in the
case of more than one
router in the system) and
the Bus to which the Display
is to be associated. The
bus mnemonic and the bus
number is shown in the box.
The Router Bus mnemonic
is shown in the Box.
» Router Bus Displays show the Router Source Mnemonics.
WinSoft V 4.2.4.0 20 Issue 5.3