Sony - TSL

More documents

Recommendations

Info

3.0 The Other Menus 3.1 File This screen will allow opening and saving of the Stack Layout via the *.mon files, of the mnemonics via the *.umd files and of the router set up file via the. *rtr files. (See Section 5 for router control). Alternative mnemonics ( .umd files) may be entered and saved, for example when the cameramen’s names change. When a new layout has been created and is to be saved, both the layout (.mon) and the UMD set-up (.umd) must be saved. The opening screen display may be set up via the Setup > Options Screen. See section 3.2. Files may be saved to any directory although the default directory is the same as the one which contains the program files. Important information for first time use when working Offline. Before working Offline, the computer must have been connected and have read the System Controller firmware once. Save an empty .mon and .umd file. This then allows the computer program to match the System Controller firmware parameters. WinSoft V 4.2.4.0 37 Issue 5.3
3.2 Setup Menu 3.2.1 Options Under Options, settings may be made for: System Controller Auto Read on connection, the choice of Starting Offline, Enabling multi tallies in to (a Router) Source, the option of Disabling Layout Changes the Enabling of Router Control. the Router Bus Tally Unique settings Default Layouts Default Data Files UMD types Monitor types The Auto Read on connection box need only be checked if it is likely that the Winsoft settings in the computer program do not match those in the Controller. The Starting Offline box need only be checked if the computer is connected to the Controller but changes made to the settings are not to automatically update the Controller. Enabling multi tallies in to (a Router) Source would be used when, say, a camera is fed to two or more mixing points, or when both red and green tallies need to be assigned to a router source. See Section 2.5.3 The Disable Layout Changes box, when checked, will prevent the accidental movement of UMDs and monitors etc. on the desktop. A double click with the LH mouse button will allow access to the router control and IRD control panel when this box is checked. The Enable Router Control box allows a monitor on the desktop to be associated with either a particular UMD or a Router Bus directly. This option is firmware dependent - see Section 4. The Bus Tally Unique box determines the way router-associated tallies are displayed. When the box is not checked, a tallied Router Bus will tally the selected Router Source. If that source is taken directly to air, i.e. tallied by the mixer directly, any Router Bus that selects the tallied on-air source is also tallied. In some circumstances this might be misleading as the actual Bus is not selected to be on-air. If the box is checked, a tallied Router Bus will still tally the selected Router Source but If that source is taken directly to air, i.e. tallied by the mixer directly, any Router Bus that selects the tallied on-air source not tallied. Default Layout sets the opening screen and there are options for clearing all UMDs from the screen and for setting the Default type of UMD. Monitors may be cleared from the screen and the Default type my be set to either 4:3 or 16:9 aspect ratio using the Radio Buttons. WinSoft V 4.2.4.0 38 Issue 5.3
Page 1 and 2: WinSoft The TSL UMD Configuring Pro
Page 3 and 4: Section B WINSOFT CONTENTS Part A 1
Page 5 and 6: 11.0 Notes on the use of the 2 x 1
Page 7 and 8: A Monitor Stack WinSoft V 4.2.4.0 6
Page 9 and 10: Winsoft / System Controller Feature
Page 11 and 12: The cable required to connect the S
Page 13 and 14: Display Terminology ♦ Fixed Displ
Page 15 and 16: This is also the box which enables
Page 17 and 18: » To change double, triple and qua
Page 19 and 20: 2.1 Setting the Mnemonics - The Edi
Page 21 and 22: 2.1.2 Router Source and Bus Mnemoni
Page 23 and 24: 2.2.1 Router Bus Priority It is pos
Page 25 and 26: 2.4 Edit Display Assignment The com
Page 27 and 28: General The System Controller has D
Page 29 and 30: 2.5.1.1 Edit > Tallies > Edit Displ
Page 31 and 32: 2.5.3 Edit Router Source Tallies Ta
Page 33 and 34: 2.5.5 Edit Tally Input Attributes -
Page 35 and 36: External Enable - normally set to O
Page 37: Assign to Source A variation on the
Page 41 and 42: Configure Router Serial Port Change
Page 43 and 44: 3.6.1 The Lists and Mnemonics The L
Page 45 and 46: 4.0 Associating Monitors with a Rou
Page 47 and 48: 5.0 Desktop Enhancements 5.1 Making
Page 49 and 50: 7.0 Audio Monitoring Unit Setup TSL
Page 51 and 52: 8.0 The Help Menu 8.1 About Winsoft
Page 53 and 54: 9.2 Configure Names Options 9.2.1 R
Page 55 and 56: Mixer Mnemonics Only Labels can (wh
Page 57 and 58: 11.0 Notes on the use of the 2 x 1
Page 59 and 60: Setting Tallies Set tallies to the

Sony - TSL

Create successful ePaper yourself

Delete template?

Save as template?