Owner's Manual
Owner's Manual
Owner's Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SD Section Operations<br />
You can switch and compose SD video in the SD section.<br />
Switching in the SD Section<br />
You can switch the SD video input using the V-440HD’s video fader<br />
(SD) along with the C-BUS channel buttons (SD) and B-BUS channel<br />
buttons (SD).<br />
Switching Buses with the AUTO Button (SD)<br />
The A-BUS and B-BUS switch automatically when the AUTO Button<br />
(SD) is pressed. The time used for switching between the A-BUS and<br />
C-BUS is set by rotating the TIME knob (SD). The time set with the<br />
TIME knob (SD) is indicated in the TRANSITION TIME display<br />
(SD). The time can be set to any value from 0 to 120 frames.<br />
A-BUS Channel Button<br />
(SD)<br />
Video Fader<br />
(SD)<br />
TIME Knob (SD)<br />
AUTO Button (SD)<br />
B-BUS Channel Button<br />
(SD)<br />
Switching Buses with the Video Fader (SD)<br />
Selecting the Effect Applied When Switching Buses (SD)<br />
The effect applied when switching the video is selected by pressing<br />
the TRANSITION buttons (SD).<br />
When the video fader (SD) is tilted towards the A-BUS, the video on<br />
the A-BUS is output. Similarly, when the video fader (SD) is tilted<br />
towards the B-BUS, the video on the B-BUS is output.<br />
* For instructions on selecting the video on the A-BUS and B-BUS,<br />
refer to Selecting the Bus Input (p. 35).<br />
To confirm (preview) the video in the bus opposite that to<br />
which the video fader (SD) is tilted, connect a television monitor<br />
to the "SD PREVIEW OUT connector" (p. 19).<br />
* In addition to the preview video, you can also output from the SD<br />
PREVIEW OUT connector the same video that is output from SD<br />
PGM OUT. Set this from the menu by selecting "13. SD Preview Out<br />
Select" under "13. System."<br />
Button Function Description<br />
CUT Cut The video switches<br />
when the video<br />
fader (SD) reaches<br />
the halfway point.<br />
MIX Dissolve The video is mixed<br />
as it gradually<br />
switches according<br />
to the angle of the<br />
video fader (SD).<br />
WIPE PATTERN 1-6 Wipe switching The video switches<br />
with a wipe effect,<br />
with the wipe corresponding<br />
to the<br />
angle of the video<br />
fader (SD).<br />
* This cannot be selected<br />
while the P in P effect<br />
(p. 35) is in use. If<br />
the P in P effect is in<br />
use when WIPE PAT-<br />
TERN 1-6 is selected,<br />
MIX is selected automatically.<br />
34
Change language