RED-D-ARC DC-600
RED-D-ARC DC-600
RED-D-ARC DC-600
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
E-11<br />
Observe Safety Guidelines<br />
detailed in the beginning of this manual.<br />
PROBLEMS<br />
(SYMPTOMS)<br />
Poor arc characteristics in all<br />
processes.<br />
TROUBLESHOOTING<br />
POSSIBLE AREAS OF<br />
MISADJUSTMENT(S)<br />
WELDING PROBLEMS<br />
1. Check for the correct input voltages<br />
on the three- phase input<br />
lines at the <strong>DC</strong><strong>600</strong>.<br />
2. Make sure the proper welding<br />
procedures are being<br />
used.(wire feed speed, arc voltage<br />
and wire size).<br />
E-11<br />
TROUBLESHOOTING GUIDE<br />
RECOMMENDED<br />
COURSE OF ACTION<br />
If all recommended possible areas<br />
of misadjustment have been<br />
checked and the problem persists,<br />
Contact your local Authorized<br />
Field Service Facility.<br />
3. Check the welding cables for<br />
loose or faulty connections.<br />
CAUTION<br />
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your<br />
Local Authorized Field Service Facility for technical troubleshooting assistance before you proceed.<br />
<strong>DC</strong>-<strong>600</strong>
Change language