The Effect of Peening on the Fatigue Life of 7050 Aluminium Alloy

DSTO-RR-0208
Clayton J.Q. and Clark G., <strong>The</strong> <strong>Effect</strong> <strong>of</strong> Steel Shot and Glass Bead <strong>Peening</strong> Treatments on the
Fatigue Resistance <strong>of</strong> 7050-T76351 Aluminium Alloy, Proc. Aust. Fract. Group, “Fracture
Mechanics in Engineering Practice”, Melbourne 1988, pp44-51
Clark G. and Clayton J.Q., <strong>Effect</strong>iveness <strong>of</strong> <strong>Peening</strong> Treatments in Improving Fatigue
Resistance <strong>of</strong> 7050 Aluminium Alloy under Constant Amplitude and Spectrum Loading,
Aust. Surface Engng Conf., University <strong>of</strong> Sth Australia, 1991
Engineering Sciences Data Unit, Guide to the <strong>Effect</strong> <strong>of</strong> Shot <strong>Peening</strong> on Fatigue Strength,
92015, ESDU, May 1992
Fair G, Noble B and Waterhouse R.B., <strong>The</strong> Stability <strong>of</strong> Compressive Stresses Induced by Shot
<strong>Peening</strong> under Conditions <strong>of</strong> fatigue and Fretting Fatigue, Advances in Surface Treatments,
Vol 1, Pergamon Press, UK, 1984
Fuchs H.O., Shot <strong>Peening</strong> <strong>Effect</strong>s and Specifications, ASTM STP 196, Am. Soc. Testing Mats.,
1956, pp22
Gallardo J.L., Optimum Shot <strong>Peening</strong> Intensity using Ceramic Shot on 7050-T7451 5.675-inch
thick Aluminium, Northrop Memo N3881-91-021, 26/2/1991
Graham D., Shot <strong>Peening</strong> <strong>of</strong> the FS488 Bulkhead, ARLENGSTL Report F1/49, January 1986
Hammond D.W. and Meguid S.A., Fatigue Fracture and Residual Stress Relaxation in Shot-
Peened Components, Surface Engineering, Elsevier Science Pty Ltd, 1990, pp386-392
Iida K., Dent and Affected Layer produced by Shot <strong>Peening</strong>, ICSP-2 1984, Paramus, N.J.,
pp283-293
Jaensson B., <strong>The</strong> Influence on the Fatigue Strength <strong>of</strong> Al Alloy parts <strong>of</strong> the relationship
between the Surface Residual Stress State and the Load-Induced Stress State, 1 st International
Conference on Shot <strong>Peening</strong>, 14-17 September, Paris, Editor Niku-Lari A., Pergamon Press,
pp 435-444, 1981
Lambase J., Y488 Bulkhead Fatigue Specimen Failure Analysis, Northrop Memo 3881-90-021,
19/2/1990
Luo W., Noble B and Waterhouse R.B., <strong>The</strong> Interaction between Shot <strong>Peening</strong> and Heat
Treatment on the Fatigue and Fretting Fatigue Properties <strong>of</strong> the High Strength Aluminium
Alloy 7075, Proc 2 nd Int. Conf. on Impact Treatment Procedure, Editor Meguid S.A., Elsevier
Applied Science Publications, Cranfield, September 1986
Luo W., Noble B and Waterhouse R.B, <strong>The</strong> <strong>Effect</strong> <strong>of</strong> Shot <strong>Peening</strong> Intensity on the Fatigue
and Fretting Fatigue Behaviour <strong>of</strong> an Aluminium Alloy, Advances in Surface Treatments and
Surface Finishing, Vol 5, Pergamon Press, UK, 1987, pp 145-153
50