HY US 01 Introduction.qxp - Hydrotech

Stenner Peristaltic Chemical Feed Pumps
Stenner PCM Series
Pump Control Module
The Stenner PCM Pump control module interfaces with
Stenner metering pumps and contact water meters for
proportional feed. It is ideal for injecting solutions based on
actual flow rate for various water treatment applications.
Item # CDN Item # USA Model Time Range*
Special Order 11815 PCM1 0.1 - 1.0 seconds
27339 Special Order PCM5 0.5 - 5.0 seconds
Special Order Special Order PCM10 1.0 - 10.0 seconds
Reset Time: Immediate
Minimum Signal Duration: 10 milliseconds
*On-Time Range: The duration of each pump ontime,
per input signal, is set by adjustment of the
knob located on the front of the unit.
Features:
• Microcontroller timer
• 10 Amp relay output
• ABS plastic housing
• On-time duration
• 10’ power cord & heavy duty jacketed signal input cable
• Reliable technology
• Durable
• Chemical resistant enclosure
• Simple knob adjustment
• Convenient installation
• 1 year guarantee from date of manufacture
Input Electrical Specifications
Voltage: 115 VAC 60 hertz
No Load Current: .45 mA ac maximum
Output Electrical Specifications
Maximum Device Load: 10 ampere resistive at 120 VAC
Dimensions:
Installation:
216 Hydrotech