HY US 01 Introduction.qxp - Hydrotech

Retention Tanks
The Universal Series is the professional’s choice for chemical and aggressive water conditions. Universal tanks
can quickly and easily be converted for hydropneumatic applications by installing our optional air volume control
assembly and micronizer. So you no longer need to stock two kinds of air-over water pressure tanks.
WellMate Advantages:
• Corrosion-proof composite construction - From the high density polyethylene
inner liner to the fiberglass-wound and epoxy resin-sealed outer shell, Universal
Series tanks contain no steel, so they can’t rust.
• Little or no maintenance - Because they contain no steel, there is no paint to
scratch or touch up.
• Light weight - WellMate tanks are quicker, easier and less costly to install than
steel tanks.
• Higher Performance - When adapted for hydropneumatic applications, the
Universal Series provides 50% more drawdown than similar sized conventional
tanks.
• Retention tanks come with a 5 Year Limited Warranty.
NSF and/or FDA listed materials
US Models
#145033 - CT30 Retention Tank
#145032 - CT40SQ Retention Tank
#145031 - CT80 Retention Tank
#145030 - CT120 Retention Tank
CT Series tank comes complete with Air Volume Control Assemblies.
Accessories
#33117 - UT30 Air Volume Control Assembly
#33118 - UT40 Air Volume Control Assembly
#33119 - UT80 Air Volume Control Assembly
#33120 - UT120 Air Volume Control Assembly
#32393 - Micronizer
#33115 - Air Volume Control Valve only
#33133 - Upper Diffuser
#33132 - Lower Diffuser
Specifications
FNPT
opening.
Miles of fiberglass
filament covered
with epoxy resin
produce superior
strength in a lightweight
design.
Seamless inner
shell molded of
FDA- and/or NSFgrade
polyethylene
provides impact
and corrosion
resistance.
Convex bottom
dome design
maximizes contact
time and facilitates
sludge removal.
1-1/4” inlet/outlet
PVC pipe
connections offer
maximum
application
flexibility.
Model Capacity Max. Operating Drawdown Diameter* Overall Height* inlet/outlet System Assembly
Pressure 30/50 Setting**
Height* to floor Connection Weight*
Number gal / liter
psi / kPa / bar gal/liter
inch / cm
inch / cm inch / cm Top / Bottom lb / kg
UT/CT30 30 / 114 75 / 500 / 5.0 6.6 / 25.0 16 / 41 43-3/4” / 111 1-1/2” / 3.8
1-1/4” FNPT /
1-1/4” MNPT 25 / 11.3
UT/CT40 40 / 151 75 / 500 / 5.0 9.0 / 34.1 16 / 41 56-1/2” / 144 1-1/2” / 3.8
1-1/4” FNPT /
1-1/4” MNPT 28 / 12.7
UT/CT80 80 / 303 75 / 500 / 5.0 17.8 / 67.4 21 / 53 62 / 157 2 / 5.1
1-1/4” FNPT /
1-1/4” MNPT 43 / 19.5
UT/CT120 120 / 454 75 / 500 / 5.0 25.5 / 96.5 24 / 61 72-1/2” / 184 2 / 5.1
1-1/4” FNPT /
1-1/4” MNPT
63 / 28.6
Maximum External Operating Temperature: 120°F (49°C)
Maximum Internal Operating Temperature: 100°F (38°C)
Minimum Operating Temperature: 40°F (4°C)
Air Volume Hydropneumatic Application Accessories
*Diameter, height and weight may vary slightly without notice.
**In keeping with current industry standards, drawdown factors are
based on Boyle's law. Actual drawdowns will vary depending upon
system variables, including the accuracy and operation of the
pressure switch and gauge and operating temperature of the
system.
Air Volume Control Assembly
Micronizer
228 Hydrotech
1-1/4”