HY US 01 Introduction.qxp - Hydrotech

890S Series Plastic Distributor Heads
The 890 Series Distributor Heads are molded of rugged
composite plastic and are designed for single in-out applications
on simple filters (sediment removal, taste, odor or pH
neutralization).
These economical heads will fit onto standard 2-1/2” NPSM tank
openings. A tapered riser port simplifies installation of 13/16”
riser pipes. Inlet and outlet are 3/4” FNPT for easy straight line
installation.
890 Series Plastic Distributor Head:
#33005 890S Distributor Head, 3/4” Inlet/Outlet
#75132 XPE-81 Distributor Head, 3/4” Inlet/Outlet
with Refill Post
990S Series Plastic Distributor Heads
The 900 Series Distributor Head is constructed of rugged plastic
and is designed for single in-out applications on simple filters such
as sediment removal, taste, odor or pH neutralization.
This economical head will fit onto standard 2-1/2” NPSM tank
openings. Inlet and outlet are 1” FNPT for easy straight line
installation, where higher flow rates are required.
990S Series PVC Distributor Head:
#33003 990S Distributor Head, 1” Inlet/Outlet
1190 Series Distributor Head With Fill Port
The 1190 Series Distributor Head is perfect for non-backwashing
applications for sacrificial medias. Additional media can easily be
added through the top fill port.
1190 Series Distributor Head With Fill Port:
#33068 1190 Distributor Head, 3/4” MNPT Fittings
and Fill Port Wrench
Hydrotech
71