HY US 01 Introduction.qxp - Hydrotech

Specifications - TMI 9100 Valve Water Softener
Unlimited soft water supply
24 hours a day, 7 days a week
In a class by itself, TMI is engineered for the most demanding
light commercial and heavy residential needs.
All water softeners require periodic regeneration when their
softening capacity is exhausted. During this regeneration, water
bypasses the softener and is consequently hard.
TMI features a twin mineral tank system governed by a meter
initiated control valve. One mineral tank is in service delivering
soft water while the second mineral tank is held in reserve. When
the softening capacity of the service tank is used up, the control
valve automatically switches the water flow to the reserve tank.
The exhausted tank regenerates immediately and becomes the
reserve.
TMI 9100 features
• Heavy duty mineral tanks and brine tanks with a ten year
guarantee
• Dependable 9100 Noryl ® control valve with a five year
guarantee
• Optional brine safety valve for added overflow protection
• Optional grid plate reduces bridging
• Optional bypass valve (3/4" only) for ease of installation
• Uses soft water for regeneration, providing improved efficiency
• Optional SXT electronic timer available
(Call Customer Service)
Specifications & Performance
Model Capacity at Various Service Backwash Resin Volume Mineral Brine Tank Brine Tank Shipping
Salt Dosages (grains) Flow Rate (2) Flow Rate per Tank Tank Size (3) Size (3) Salt Capacity Weight
Metered Metered 15lb/cu.ft. 10lb/cu.ft. (1) 6lb/cu.ft. 3lb/cu.ft. (usgpm) (usgpm) (cu.ft.) (inches) (inches) (lbs) (lbs)
9100TMI 3/4"-844-75 9100TMI 1"-844-75 22,500 18,000 12,750 9,750 8 1.5 0.75 8 x 44 19 x 33 335 140
9100TMI 3/4"-948-100 9100TMI 1"-948-100 30,000 24,000 17,000 13,000 10 2.0 1.00 9 x 48 19 x 33 335 170
9100TMI 3/4"-1035-100 9100TMI 1"-1035-100 30,000 24,000 17,000 13,000 11 2.0 1.00 9 x 48 19 x 33 335 170
9100TMI 3/4"-1047-125 9100TMI 1"-1047-125 37,500 30,000 21,250 16,250 11 2.4 1.25 10 x 47 19 x 33 335 220
9100TMI 3/4"-1054-150 9100TMI 1"-1054-150 45,000 36,000 25,500 19,500 10 2.4 1.50 10 x 54 19 x 33 335 250
9100TMI 3/4"-1252-200 9100TMI 1"-1252-200 60,000 48,000 34,000 26,000 12 3.5 2.00 12 x 52 19 x 33 335 300
9100TMI 3/4"-1450-250 9100TMI 1"-1450-250 75,000 60,000 42,500 32,500 12 5.0 2.50 14 x 50 24 x 50 355 350
SEE COMMERCIAL SECTION FOR LARGER TMI SOFTENERS.
ADDITIONAL INFORMATION: Operating Temperature Range = 34° to 110°F (1° to 43°C). Operating Pressure Range = 20 to 120 psi (1.37 to 8.27 bar). The
manufacturer reserves the right to make product improvements which may deviate from the specifications and descriptions shown above, without obligation to
change previously manufactured products or to note the change.
CAUTION: These products are not intended to be used to treat water that is microbiologically unsafe or of unknown quality without adequate disinfection before
or after the system.
NOTES: (1) 10lb/cu.ft. salt dosage is the standard factory setting. (2) The Service Flow Rate given will not exceed a pressure drop of 15psi. (3) Dimensions of
cylindrical tanks shown are diameter (or width) x height. Cabinets shown as length x width x height.
40 Hydrotech