HY US 01 Introduction.qxp - Hydrotech

FAF SERIES Commercial Water Softeners Specifications
Model Capacity Resin Critical 2750 - 1” Valve Units 2850 - 1.5” Valve Units 2900s - 2” Valve Units
(grains) Volume Application Flow Rate at 15 psi and 25 psi Pressure Drops (Single Tank Systems)
@15lb-salt/cu.ft. cu.ft. Max. Flow Rate @ 15psi @ 25psi @ 15psi @ 25psi @ 15psi @ 25psi
@10lb-salt/cu.ft. (cu.m.) usgpm (lps) usgpm (lps) usgpm (lps) usgpm (lps)
FAF 45 45,000 1.5 7.5 17 23
40,500 (0.04) (0.47) (1.07) (1.45)
FAF 60 60,000 2 10 22 29 36 49 50 75
54,000 (0.06) (0.63) (1.39) (1.83) (2.27) (3.09) (3.15) (4.73)
FAF 90 90,000 3 15 20 27 32 44 41 60
81,000 (0.08) (0.95) (1.26) (1.70) (2.02) (2.78) (2.59) (3.79)
FAF 120 120,000 4 20 21 29 35 49 49 70
108,000 (0.11) (1.26) (1.32) (1.83) (2.21) (3.09) (3.09) (4.42)
FAF 150 150,000 5 25 24 31 43 58 76 103
135,000 (0.14) (1.58) (1.51) (1.96) (2.71) (3.66) (4.79) (6.50)
FAF 180 180,000 6 30 24 31 42 57 72 98
162,000 (0.17) (1.89) (1.51) (1.96) (2.65) (3.60) (4.54) (6.18)
FAF 210 210,000 7 35 23 31 41 55 67 93
189,000 (0.20) (2.21) (1.45) (1.96) (2.59) (3.47) (4.23) (5.87)
FAF 240 240,000 8 40 23 30 40 54 63 89
216,000 (0.23) (2.52) (1.45) (1.89) (2.42) (3.41) (3.97) (5.62)
FAF 270 270,000 9 45 24 31 42 57 75 104
243,000 (0.25) (2.84) (1.51) (1.96) (2.65) (3.60) (4.73) (6.56)
FAF 300 300,000 10 50 23 31 42 57 73 102
270,000 (0.28) (3.15) (1.45) (1.96) (2.65) (3.60) (4.61) (6.44)
FAF 330 330,000 11 55 23 31 42 56 71 99
297,000 (0.31) (3.47) (1.45) (1.96) (2.65) (3.53) (4.48) (6.25)
FAF 360 360,000 12 60 46 61 84 116
324,000 (0.34) (3.79) (2.90) (3.85) (5.30) (7.32)
FAF 390 390,000 13 65 46 61 82 114
351,000 (0.37) (4.10) (2.90) (3.85) (5.17) (7.19)
FAF 450 450,000 15 75 45 60 80 112
405,000 (0.42) (4.73) (2.84) (3.79) (5.05) (7.07)
FAF 510 510,000 17 85 45 59 79 109
459,000 (0.48) (5.36) (2.84) (3.72) (4.98) (6.88)
FAF 570 570,000 19 95 86 (1) 116 (1)
513,000 (0.54) (5.99) (5.43) (7.32)
FAF 600 600,000 20 100 85 (1) 115 (1)
540,000 (0.57) (6.31) (5.36) (7.26)
FAF 630 630,000 21 105 84 (1) 114 (1)
567,000 (0.59) (6.62) (5.30) (7.19)
FAF 660 660,000 22 110
594,000 (0.62) (6.94)
FAF 720 720,000 24 120
648,000 (0.68) (7.57)
FAF 780 780,000 26 130
702,000 (0.74) (8.20)
FAF 900 900,000 30 150
810,000 (0.85) (9.46)
FAF 1020 1,020,000 34 170
918,000 (0.96) (10.73)
FAF 1080 1,080,000 36 180
972,000 (1.02) (11.36)
FAF 1740 1,740,000 58 220
1,566,000 (1.64) (13.88)
Shipping Weights:
• Single units shipping
weights shown are
maximums for each unit
size.
• Valve type, multiple unit
systems and additional
options may alter this
figure.
• Please consult customer
service or a system
specification drawing for
actual shipping weights.
(1)
Must have 60 psi
minimum to regenerate units
properly.
Additional Notes:
• Critical applications refer to
softening prior to
equipment such as: Boiler
makeup water, heat
exchangers and other
equipment sensitive to
hardness scaling.
• Depending on the valve
used in each system,
critical application flow
rates are decreased if the
pressure drop is 15psig or
greater.
• Factory settings shown in
italics.
• Hydrotech reserves the
right to make product
improvements which may
deviate from the
specifications and
descriptions stated herein,
without obligation to
change previously
manufactured products or
to note the change.
258 Hydrotech