HY US 01 Introduction.qxp - Hydrotech

Series C Specifications
Pressure and Flow Rate Capacity
Capacity
Nominal
GPD 6 12* 24 30
GPH 0.25 0.50 1.0 1.25
LPH 0.9 1.9 3.8 4.7
Pressure,
Max PSIG/Bar
80/5.6 LC02 LC03 LC04 LC54
*Stocked Item. See materials for pump construction.
Series C - Four model selections. Digit 1 and 2 (LC) signify product class, digit 3 and 4 signify pressure/flow.
For full model selection information, please contact our Order Desk.
Liquid End Materials
Series Pump Diaphragm Check Valves Fittings Bleed Valve Injection Valve Assembly Tubing
Head Seats/O-rings Balls Foot Valve Assembly
C GFPPL PTFE-faced PTFE Ceramic, GFPPL Same as fitting Same as fitting and Clear PVC
PVC Hypalon-backed Hypalon PTFE, PVC and check check valve selected White PE
SAN Viton 316SS PVDF valve selected,
PVDF Alloy C except 316SS
316SS
Important: Material Code - GFPPL = Glass-filled Polypropylene, PVC = Polyvinyl Chloride, SAN = Styrene Acrylonitrile, PE = Polyethylene, PVDF = Polyvinylidene
Fluoride. Hypalon and Viton are registered trademarks of E.I. DuPont Company. PVC wetted and recommended for sodium hypochlorite.
*Item # 01886 - Pump Model LCO3SAVTC-1
Electrical............................115 VAC / 60 Hz
Output ..............................12 GPD at 80 PSI
Materials............................PVC pump head, fittings and valves, ceramic ball checks, teflon seals, PE tubing
*Item # 01887 - Pump Model LCO3SBVTC-1
Electrical............................230 VAC / 60 Hz
Output ..............................12 GPD at 80 PSI
Materials............................PVC pump head, fittings and valves, ceramic ball checks, teflon seals, PE tubing
Other Series C Pumps sizes and materials selections available through special order
Dimensions
Series C Dimensions - Inches
Note: inches x 2.54=cm
Model A B C D E Shipping
No.
Weight (Lbs.)
LC02 5.0 9.6 9.5 6.5 8.2 10
LC03 5.0 9.9 9.5 6.5 8.5 10
LC04 5.0 9.9 9.5 6.5 8.5 10
LC54 5.0 9.9 9.5 6.5 8.5 10
Hydrotech
219