User Guide IQSocket IQSW-IP10

©2011 IQtronic, Ltd
3.2.3 Test rules – watchdog function
You can configure here automatic watch dog function based on assessment of
ICMP packet lost to selected IP host:
Basically, you can define up to three test rules, two with numerical IP address
of evaluated host, third rule can be defined using host name, and it’s IP
address will be resolved via DNS. Each rule is sending periodically ICMP test
packets to the host and when number of received ICMP replies is lower than
allowed packet loss, rule will generate request for output control event, which
Page 13 of 36