TCAEY-THAEY 115÷238 - Rhoss

TCAEY 133÷238
technical data
Table “A”: Technical data
TCAEY mod el 133 233 238
Nominal cooling c apacit y (*) kW 33, 99 32, 45 38, 80
E.E.R. 2,56 2,64 3,06
E.S.E.E.R. 2,85 2,92 3,69
Sound pressure (**) dB(A) 54 54 54
Sound power (***) dB(A) 78 78 79
Scroll/step compressor No. 1/1 2/2 2/2
Fans No. x kW 1x0. 61 1x0. 61 2x0, 78
Exc hanger water c ont ents l 3,20 3,20 3,20
Wat er side exchanger nominal water fl ow (*) l/h 5846 5581 6674
Nominal pressure drops, water side heat exchanger (*)
Standard inst allation
kP a 30, 26 27, 63 56, 00
Residual s tatic pressure (P1 ins tallati on) (*) kPa 134 134 130
Residual s tatic pressure (P2 ins tallati on) (*) kPa 230 231 227
Residual s tatic pressure (ASP1 inst allation) (*) kP a 102 105 87
Residual s tatic pressure (ASP2 inst allation) (*) kP a 198 202 184
Tank wat er content (ASP1 – ASP2 inst allation) l 80 80 150
R410A refrigerant c harge
See s erial no. plate
Pol yest er oil charge
See c ompress or plat e
Electri cal data
Total absorbed power (*) (●) kW 13, 30 12, 30 12, 70
Pump absor bed power (P1/ ASP1) kW 0,70 0,70 0,70
Pump absor bed power (P2/ ASP2) kW 1,5 1,5 1,5
Electrical power suppl y V-ph-Hz 400-3+N-50
Auxiliary power supply V-ph-Hz 230-1- 50
Nominal current (●) A 22, 0 20, 0 28
Maximum current (●) A 25, 0 26, 0 34
Starting current A 200 115 119
Pump absor bed power (P1/ ASP1) A 5,1 5,1 5,1
Pump absor bed power (P2/ ASP2) A 8,6 8,6 8,6
Dimensions
Width (L) mm 1660 1660 2260
Height (H) mm 1570 1570 1570
Depth (P) mm 1000 1000 1000
Wat er connec tions Ø 2” 2” 2”
(*) In the f ollowi ng conditions : condenser i nput
air temperature 35°C; chilled water temperatur e
7°C; t emperat ure differential at evaporat or 5°C.
(**) Sound pressure l evel in dB(A), meas ured at
a dist ance of 5 m from the unit, with a
directionality fac tor of 2.
(***) Sound power level in dB (A) bas ed on
measurements made i n acc ordance wit h t he
UNI EN-ISO 3744 standard and Eurovent 8/1.
(●) Add t he power and current val ues of t he
pumps (P1/P2 or ASP1/ASP2) t o obt ain t he
power and current absorbed by t he unit i n
P1/P2 and ASP1/ASP2 versions.
N.B.:
The val ues for available static press ure of t he
pumps and the pressure drops of the
exc hangers can be found on page 35.
The calc ulation of t he E.E.R. and C.O .P. does
not take the pump abs orption int o acc ount.
H
P
133-233
L
238
H
P
L
14