TCAEY-THAEY 115÷238 - Rhoss
TCAEY-THAEY 115÷238 - Rhoss
TCAEY-THAEY 115÷238 - Rhoss
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>THAEY</strong> 133÷238<br />
technical data<br />
Table “A”: Technical data<br />
<strong>THAEY</strong> mod el 133 233 238<br />
Nominal cooling c apacit y (*) kW 33, 99 32, 45 38, 80<br />
E.E.R. 2,56 2,64 3,06<br />
E.E.R. (EN 14511) - - 3,57<br />
E.S.E.E.R. 2,84 2,93 3,69<br />
Nominal heating capacity (**) kW 39, 14 37, 49 41, 72<br />
C.O.P. 2,94 3,05 3,26<br />
C.O.P. (EN 14511) - - 4,14<br />
Sound pressure (***) dB(A) 55 55 54<br />
Sound power (****) dB(A) 79 79 79<br />
Scroll/step compressor No. 1/1 2/2 2/2<br />
Fans No. x kW 1 x 0.61 1 x 0.61 2x0, 78<br />
Heat exchanger water contents l 3,20 3,20 3,20<br />
Wat er side heat exchanger nomi nal water flow (*) l/h 5846 5581 6674<br />
Nominal pressure drops, water side exchanger (*) Standard installation kP a 30, 26 27, 63 56, 00<br />
Residual s tatic pressure (P1 ins tallati on) (*) kPa 135 136 130<br />
Residual s tatic pressure (P2 ins tallati on) (*) kPa 230 231 227<br />
Residual s tatic pressure (ASP1 inst allation) (*) kP a 102 107 87<br />
Residual s tatic pressure (ASP2 inst allation) (*) kP a 198 202 184<br />
Tank wat er content (ASP1 – ASP2 inst allation) l 80 80 150<br />
R410A refrigerant c harge<br />
See s erial No. plat e<br />
Pol yest er oil charge<br />
See c ompress or plat e<br />
Electri cal data<br />
Absorbed power in summer oper ation (*) (●) kW 13, 30 12, 30 12, 70<br />
Absorbed power in wint er operation (**) (●) kW 13, 30 12, 30 12, 80<br />
Pump absor bed power (P1/ ASP1) kW 0,70 0,70 0,70<br />
Pump absor bed power (P2/ ASP2) kW 1,5 1,5 1,5<br />
Electrical power suppl y V-ph-Hz 400-3+N-50<br />
Auxiliary power supply V-ph-Hz 230-1- 50<br />
Nominal current in s ummer operation (*) (●) A 22, 0 20, 0 28<br />
Nominal current in wint er operati on (**) (●) A 20, 0 19, 0 26<br />
Maximum current (●) A 25, 0 26, 0 34<br />
Starting current A 200 115 119<br />
Pump absor bed power (P1/ ASP1) A 5,1 5,1 5,1<br />
Pump absor bed power (P2/ ASP2) A 8,6 8,6 8,6<br />
Dimensions<br />
Width (L) mm 1660 1660 2260<br />
Height (H) mm 1570 1570 1570<br />
Depth (P) mm 1000 1000 1000<br />
Wat er connec tions Ø 2” 2” 2”<br />
(*) In the f ollowi ng conditions : condenser<br />
inlet air temperature 35°C; chilled water<br />
temperature 7°C; t emper ature diff erenti al at<br />
evaporat or 5°C.<br />
(**) In the f ollowi ng conditions : evaporator<br />
inlet air t emperature 7°C D.B., 6°C W. B.; hot<br />
wat er temperat ure 45°C; temperatur e<br />
differential at t he c ondenser 5°C.<br />
(***) Sound pressure level in dB(A),<br />
measured at a distance of 5 m from t he unit ,<br />
with a directionalit y fac tor of 2.<br />
(****) Sound power l evel in dB (A) bas ed on<br />
measurements made i n acc ordance wit h t he<br />
UNI EN-ISO 3744 standard and Eurovent<br />
8/1.<br />
(●) Add t he power and current val ues of t he<br />
pumps (P1/P2 or ASP1/ASP2) t o obt ain t he<br />
power and current absorbed by t he unit i n<br />
P1/P2 and ASP1/ASP2 versions.<br />
N.B.: The val ues f or available static press ure<br />
of t he pumps and t he pressur e drops of t he<br />
exc hangers can be found on page 36.<br />
The calc ulation of t he E.E.R. and C.O .P.<br />
does not t ake t he pump absorption i nto<br />
account.<br />
133-233<br />
H<br />
P<br />
L<br />
H<br />
P<br />
238<br />
L<br />
16