Metos Marine Galley and Laundry Equipment

METOS WD-7 COMBI-DISHWASHERS
The control panel displays the
selected programme, the remaining
washing time, washing and
rinsing temperatures and possible
error situations. The machine
has three programmable wash
programmes (the wash and rinse
times and the rinse temperature
can be programmed). The machine
also has a self-cleaning
programme and a pause function.
The display can show daily
and cumulative basket counts.
When the rinse cycle starts, the
dirty rinse water is ejected from
the rotating wash arms, so that
wash water no longer drips on
the clean dishes when the basket
is picked up. Effi cient tank strainers
keep the wash water clean
for a long time. With Metos WD-
7 models the lower wash arm
pressure can be selected to be
either normal or the pot washing
pressure (2 times normal). The
programmes can be preset for
pot washing.
Metos WD-7 Autohood – automatic hood lifting
and lowering
When opening the hood tilts forward and releases
the hot steam from the rear upwards. When most
of the steam has left the hood it is automatically
lifted to its upper position. With the press of a button
the hood closes auto matically and the wash
programme starts. The hood lifting system is hydraulic
and works with cold tap water. Automatic
hood lifi ting and lowering improves ergonomics
and the drying of the dishes starts immediately.
500 mm
610 mm
The hood fi rst tilts forward and
the steam is released from the
rear upwards. The exhaust hood
(optional) collects released steam
efficiently. The exhaust hood is
connected to the kitchen ventilation
system. The unit can also
control a fan (control is optional).
The unit is also available with automatic
hood lifting and lowering
(requires a cold water connection).
The manual hood, lightened
by gas springs, is very light to
operate.
WD-7 makes HACCP easy:
■ low tank temperature warning
- no risk of foaming
■ final rinse water temperature
control before rinse cycle start:
rinsing begins only when the right
temperature has been reached
■ fi nal rinse water volume control:
warning light if there is not enough
water
■ self-cleaning programme
■ the unit can be connected to a
central HACCP system (optional)
Diagnostics: in-line monitoring,
operational errors and failure situations
in the panel display – rapid
correction of failures
Metos Dimensions mm Boiler Electric connection
WD-7 660/761x657/715x1540/2080±25 9 kW 400/440V3~ 10,1kW 16A 50-60Hz
WD-7 Autohood 660/761x657/715x1540/2080±25 9 kW 400/440V3~ 10,1kW 16A 50-60Hz
Accessories
Bakery plate basket WD-7
Exhaust hood WD-7
Installation drawing on page 257.
Standard delivery for the dishwashers includes a rinse aid dispenser, liquid detergent dispenser,
baskets for plates, cutlery and cups (one of each). Metos WD-7 machines can also be equipped with
drain and pressure-boosting pumps and an automatic system for controlling the ventilation fan. All
models can be connected to cold water by including a more effi cient boiler heater (cold water connection
reduces somewhat the machine’s capacity and raises the total power by 3 kW).
| 177