Metos Marine Galley and Laundry Equipment

METOS SOFT DICING – DICING GRID PACKAGE
Some fruit and vegetables are tricky to slice even with a high-class
chef’s knife. To get the perfect result with a slicing machine you need
well-designed, professional equipment. Now even slicing soft products
is easy with a vegetable slicer.
Soft Dicing grid package (SD) includes slicer disc and dicing grid. The parts of the slicer
disc and dicing grid are high quality special steel and are extremely sharp.
The blade edges are angled just right to get the best result, which is important especially
when you cut soft and juicy products.
With the SD sets you can cut large quantities of diffi cult vegetables and fruit. All discs
are machine washable diwash-quality. There are four dicing grid package sizes 8x8x8,
10x10x10, 12x12x12 and 15x15x15 mm.
Tomatoes
Juicy inside and covered with a thin skin, sharp knives set at the right
angle are essential for dicing tomatoes to avoid a result that looks like
crushed tomatoes. With the SD sets you can cut large quantities of tomatoes
for your salsa, pizza topping, etc.
Onions
With onions it is important to obtain a clean cut, otherwise they get a very
bitter taste. With the SD sets you get a perfect and tasty result.
Bananas
Bananas are mushy, sticky and soft. Thanks to the SD sets you get neat
banana dices for your fruit salads, ice cream toppings, etc.
METOS STANDS FOR SLICER DISCS
The disc stands are suited for all of the slicer discs of the Metos RG-200-RG-400 vegetable slicers.
The pegs are fi xed at a 5° upward angle ensuring that the discs are kept well in place. Each peg
can take two discs. The blade parts don’t touch each other. The discs can be easily and safely
be taken from the stand by lifting them out of the case as the operator can see the whole disc
and avoid touching the sharp blades.
The wall-mounted model is easy to attach to hooks or screws on the wall.
The trolley-mounted model fi ts Metos service trolleys SET-70 - SET-105, GN rail trolley GNT-14
and shelf trolley SHT-75. The stand is pressed against the edge of the shelf and it doesn’t have
to be fi xed to the trolley. The long supports of the stand lean against the shelves below and
stay fi rmly in place. The shelf trolley has enough space even for the accessories of the largest
vegetable cutter RG-400.
Stand for slicer discs Dimensions mm
Wall mounted 4 pegs, for 8 discs 430x160x635
Wall mounted 6 pegs, for 12 discs 430x160x885
Trolley-mounted 4 pegs, for 8 discs 430x160x635
Trolley-mounted 6 pegs, for 12 discs 430x160x885
Trolley-mounted stand for four vegetable
cutter discs mounted on the Metos SHT-75
shelf trolley.
| 19