Metos Marine Galley and Laundry Equipment

26 |
METOS THERMOMETERS
TLC 720 TFX 420
Metos KTL 65 meat block
Metos birch cutting board
Metos cutting board rack
Metos offers choice of three thermometers, two of which are calibrated and supplied with ISO
9001 calibration certifi cate. When implementing HACCP other thermometers can be compared
to calibrated thermometers. The renewal of the calibration should take place once every year.
Metos TFX 420 is a calibrated thermometer with -50...+400°C temperature range, resolution
0,1°C and accuracy +/-0,2°C. Battery 3V/1Ah lithium, operating life appr. 5 years depending on
use. Battery can be changed by the operator. Battery saving switches the thermometer off if it
is not used for two hours. Sensor Pt 1000, stainless steel probe 120 mm, sharp-edged. Probe
cable 0,6 m. The thermometer is waterproof. Weight 90 g.
The calibrated TLC 720 thermometer is equipped with a fold back probe. Temperature range
-33...+220°C. Infrared resolution 0,1°C and accuracy 2%. The emissivity can be set in the range
of 0.10 an 1, the factory-set emissivity is 0.95. The resolution of the probe is 0,1°C and accuracy
is ±0,8 °C. Battery CR2450 lithium, operating life appr. 40 hours of constant use. Battery save
function. Battery can be changed by the operator. Moisture class IP54. Probe length 105 mm.
Weight 97 g.
The temperature range of the digital TDC 150 thermometer is -5...+150°C, resolution 0,1°C and
accuracy ±1°C. On/off button and hold button, which is used when measured point cannot be
seen or results are read elsewhere. Display shows the need to change the battery. Battery saving
switches off the thermometer after 1 hour use. Probe of stainless steel. Waterproof constuction.
Battery 1x1,5V LR44 G13 or similar. Battery can be changed by the operator.
Metos Dimensions mm
TFX 420 54x22x109
TLC 720 45x20x165
TDC 150
METOS MEAT BLOCKS
Metos LT 65 meat block has separate body and block sections. The body
construction is of sturdy stainless steel. The base has 4 adjustable legs. The
removable block section is of special food plastic. The block thickness is 8 cm.
The block can be conveniently washed in a dishwasher. Resists intensive use
in demanding conditions.
Metos KTL 65 meat block has separate body and block sections. The body
construction is of stainless steel. The base has 4 adjustable legs. The removable
block section is of compressed birch. Thickness of the block section is 20 cm.
Resists intensive use in demanding conditions.
Metos Dimensions mm
LT 65 meat block 500x500x850
KTL 65 meat block 500x600x850
METOS CUTTING BOARDS
Metos plastic cutting boards of sturdy special food plastic. Groove for collecting
liquid. The underside of the board has rubber feet that hold the board
steadily in place on the counter when cutting.
Metos birch cutting boards, GN1/1 dimensions: The wooden cutting board
is made of wear-resistant compressed birch. Both short sides of the board have
fi nger recesses that make gripping easier.
Metos cutting board rack: The Metos cutting board rack is made of sturdy
stainless steel and has space for 5 cutting boards. Board thickness max. 50
mm.
Metos Dimensions mm
Cutting board, plastic 500x300x15
Cutting board, birch 530x325x50
Cutting board rack 340x315x278
TDC 150
Metos LT 65 meat block