Metos Marine Galley and Laundry Equipment

METOS ROLLER TABLE
The roller sections are easy to lift for washing.
Unloading table
PLATE CASSETTE HOLDER
Static roller table with two guide rail sections
Metos roller table is attached to the exit of the machine or powered turn track. The construction
is of stainless steel. Resistant full length plastic rollers with ball bearings. The roller
sections are easy to lift for washing. Outlet drainage either into turn track or from the bottom
of the unit. Shelf and rails for storing empty 500 x 500 baskets. Adjustable height.
Pivoted table has four 125 mm castor wheels, two of them with brakes. If the roller table
is connected to a 180 degree curve a pivoted model is advisable.
Guide rail
Pivoted roller table for 180 degree curve Dimensions mm sections
460-2 1060x630x875±25 1
460-3 1585x630x875±25 2
460-4 2110x630x875±25 3
460-5 2635x630x875±25 4
460-6 3160x630x875±25 5
Guide rail
Static roller table for 90 degree curve sections
465-2 1060x630x875±25 1
465-3 1585x630x875±25 2
465-4 2110x630x875±25 3
465-5 2635x630x875±25 4
465-6 3160x630x875±25 5
Guide rail
Static roller table for connection to rack conveyor machine sections
465-2D-WD 1060x630x875±25 1
465-3D-WD 1585x630x875±25 2
465-4D-WD 2110x630x875±25 3
465-5D-WD 2635x630x875±25 4
465-6D-WD 3160x630x875±25 5
Accessories Dimensions mm
Unloading table 430 width 500 mm depth 300 mm
Wall mounted holder Dimensions mm
502-2 1120
502-3 1660
502-4 2200
Drying line mounted holder Dimensions mm
502T-1 960
502T-2 1120
502T-3 1485
502T-4 2010
502T-5 2535
502T-6 3060
| 205