CompuScope SDK Manua.. - Egmont Instruments

gage_board_start_capture, gage_board_force_capture, and gage_board_abort_capture, respectively.
Data retrieval is done in the same manner as in Master/Slave mode. That is, the CompuScope is first
selected using the gage_select_board routine and its data are downloaded using any of the data transfer
subroutines.
For both types of Multi-card CompuScope systems, Master/Slave and Multiple/Independent, the
gage_driver_initialize routine is called to initialize the entire system. In a Master/Slave system, starting
and aborting a capture can be done with a single subroutine call that is automatically sent to the Master
CompuScope. In a Multiple/Independent system, starting and aborting a capture must be down separately
for each CompuScope in the system by sending the appropriate call separately to each board.
CompuScope API Reference Manual
101