CompuScope SDK Manua.. - Egmont Instruments

Multiple Record Mode Routines
Name of the Routine
gage_calculate_mra_addresses
gage_calculate_mr_addresses
gage_multiple_record
gage_multiple_record_acquisitions_32
Description
Corrects the trigger address based on the ETB bit
information located in the data acquired from the card at the
raw calculated trigger address.
Returns the starting, trigger and ending addresses for the
specified channel of the current board to the calling routine.
Allows the application program to force the CompuScope
hardware to capture only the depth specified when the
trigger event occurs. The card then re-arms automatically
itself to accept another trigger event and record that data
immediately following the first capture.
Sets the number of Multiple Record groups that will be
taken by the CompuScope hardware.
Miscellaneous Routines
Name of the Routine
gage_abort
gage_abort_capture
gage_board_type_size_to_text
gage_busy
gage_force_capture
gage_get_error_code
gage_need_ram
gage_normalize_address
gage_power_control
gage_software_trigger
gage_start_capture
gage_triggered
Description
Used to regain control of the CompuScope board(s).
Used to regain control of the CompuScope board(s).
Returns the pointer to the string that contains the
information about the installed CompuScope board.
Determines if CompuScope board is busy capturing the data
or not.
Forces the capture of data by the CompuScope board(s).
Returns the error code associated with the last call to the
CompuScope driver.
Allows the application program to access the CompuScope
hardware’s RAM buffers.
Calculates the logical address for the CompuScope
hardware.
Used to control the automatic power management available
on the CompuScopes equipped with this feature.
Will trigger the hardware when the trigger source has been
set to GAGE_SOFTWARE.
Prepares the CompuScope hardware for data acquisition.
Determines if the CompuScope hardware has encountered a
trigger event or not.
CompuScope API Reference Manual
9