Crossover Main Replacement - Coke Oven Managers Association

More documents

Recommendations

Info

Introduction • Morfa <strong>Coke</strong> Making plant is an Otto Simon Carves’ Twin Flue Underjet Compound design with twin collector mains. • The <strong>Oven</strong>s were comissioned in 1981 and consists of 84 ovens (2 batteries of 42 ovens). • As part of the coke making process, volatile gases released from the coal during the carbonisation process are exhausted from the ovens to a By-Product plant, via a gas recovery pipe work system referred to as “crossover mains” There are four crossover mains in total, two per battery. 2
Introduction After 33 years of uninterrupted service, each crossover has typically seen in the region of 1.45 billion m 3 of coke oven gas. The system has already surpassed its original design life by some 8 years and the pipe work was in poor condition. 3
Page 1: Matthew John Crossover Main Replace
Page 5 and 6: Introduction The first two options
Page 7 and 8: Planning Phase Health and Safety Sa
Page 9 and 10: Planning Phase Assembly Drawings An
Page 11 and 12: Preparation Phase Jacking Steelwork
Page 13 and 14: Preparation Phase Spreader beam Due
Page 15 and 16: Preparation Phase Interconnecting p
Page 17 and 18: Preparation Phase Expansion Joint T
Page 19 and 20: Crossover Main Replacement Isolatin
Page 21 and 22: Crossover Main Replacement Removal
Page 23 and 24: Crossover Main Replacement Horizont
Page 25 and 26: Installing the new Crossover Mains

Crossover Main Replacement - Coke Oven Managers Association

Create successful ePaper yourself

Delete template?

Save as template?