Crossover Main Replacement - Coke Oven Managers Association

More documents

Recommendations

Info

Planning Phase The planning phase was key to the success of this project. A project team was formed which was collaboration between both Process and Engineering personnel from the <strong>Coke</strong> oven department, Process Safety personnel and personnel from the Project department. A master schedule was produced and a weekly status review plan was used to provide an easy to read breakdown of the imminent tasks. 6
Planning Phase Health and Safety Safety was the main priority of this project and to ensure there weren’t any accidents, there were a number of safety measures taken. The project was carried out in accordance with CDM regulations and F10 notification was issued to the HSE. The project team were nominated as both CDM Co-ordinator and Principal Contractor. 7
Page 1 and 2: Matthew John Crossover Main Replace
Page 3 and 4: Introduction After 33 years of unin
Page 5: Introduction The first two options
Page 9 and 10: Planning Phase Assembly Drawings An
Page 11 and 12: Preparation Phase Jacking Steelwork
Page 13 and 14: Preparation Phase Spreader beam Due
Page 15 and 16: Preparation Phase Interconnecting p
Page 17 and 18: Preparation Phase Expansion Joint T
Page 19 and 20: Crossover Main Replacement Isolatin
Page 21 and 22: Crossover Main Replacement Removal
Page 23 and 24: Crossover Main Replacement Horizont
Page 25 and 26: Installing the new Crossover Mains

Crossover Main Replacement - Coke Oven Managers Association

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?