HC25 AT Command Set - Portech.com.tw

HC25 AT Command Set
10.7 AT+CGEQMIN
s
10.7 AT+CGEQMIN 3G Quality of Service Profile (Minimum acceptable)
Syntax
Test Command
AT+CGEQMIN=
Response(s)
+CGEQMIN: , (list of supported s), (list of supported s), (list of supported s), (list of supported s),
(list of supported s), (list of supported s), (list of
supported s), (list of supported s), (list of supported
s), (list of supported s), (list of
supported s), (list of supported s)
OK
Read Command
AT+CGEQMIN
Response(s)
+CGEQMIN: [, , , ,
, , , , , , ,
, ]
[+CGEQMIN: , , , ,
, , , , , , ,
, ]
[+CGEQMIN: ...]
Write Command
AT+CGEQMIN=[, [, [, [,
[, [, [, [, [, [, [, [, ]]]]]]]]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN USB0-MDM USB0-APP Last
3GPP TS 27.007 + + + -
Command Description
The test command returns values supported as a compound value.
The read command returns the current settings for each defined context for which a QOS was explicitly specified.
The write command allows the TE to specify a Quality of Service Profile for the context identified by the context
identification parameter which is checked by the MT against the negotiated profile returned in the Activate/Modify
PDP Context Accept message.
A special form of the write command, AT+CGEQMIN= causes the requested profile for context number
to become undefined.
HC25_ATC_V01.200 Page 168 of 290 7/25/07
Confidential / Released