HC25 AT Command Set - Portech.com.tw

HC25 AT Command Set
3. Status Control Commands s
3. Status Control Commands
The AT Commands described in this chapter allow the external application to obtain various status information
from the HC25.
3.1 AT^SIND Extended Indicator Control
The AT^SIND command controls the presentation of Indicator Event Reports. You can enable / disable URCs to
be output each time when the value of the related indicator changes, you can request the current status of all
indicators, and you can also query the status of a single indicator.
Syntax
Test Command
AT^SIND=
Response(s)
^SIND: (, list of supported s)[, (, list of supported s)[,
...]], (list of supported s)
OK
Read Command
AT^SIND
Response(s)
^SIND: , ,
[^SIND: , , ]
...
OK
ERROR
+CME ERROR:
Write Command
AT^SIND=,
Response(s)
^SIND: , ,
In case of: ="eons" and =2
^SIND: , , , , ,
In case of: ="nitz" and =2
^SIND: , , , ,
OK
ERROR
+CME ERROR:
Reference(s) PIN USB0-MDM USB0-APP Last
SIEMENS - + + -
HC25_ATC_V01.200 Page 50 of 290 7/25/07
Confidential / Released