HC25 AT Command Set - Portech.com.tw

HC25 AT Command Set
13.3 AT^SCKS
s
13.3 AT^SCKS Query SIM and Chip Card Holder Status
This command controls the SIM connection presentation mode and queries the connection status of the SIM and
the card holder tray of the HC25.
Syntax
Test Command
AT^SCKS=
Response(s)
^SCKS:(list of supported s)
OK
Read Command
AT^SCKS
Response(s)
^SCKS: ,
OK
ERROR
+CME ERROR:
Write Command
AT^SCKS=
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN USB0-MDM USB0-APP Last
SIEMENS - + + -
Unsolicited Result Codes
URC 1
^SCKS:
If the HC25's SIM connection status has changed an unsolicited result code (URC) is issued.
URC 2
^SCRD:
If the SIM is not supported by HC25 and the connection is rejected an unsolicited result code (URC) is issued.
The presentation of this URC cannot be suppressed.
Command Description
The read command returns the URC presentation mode and the status of the SIM card connection.
The write command enables or disables the presentation of URCs to report the SIM card connection.
If the ME is powered down or reset (AT+CFUN or AT^SMSO) the current presentation mode setting will
not be retained. Therefore the setting =1 needs to be restored after power on the HC25.
Parameter Description
(num)
0 (&F) Suppress unsolicited result code ^SCKS
1 Output unsolicited result codes
HC25_ATC_V01.200 Page 232 of 290 7/25/07
Confidential / Released