HC25 AT Command Set - Portech.com.tw

HC25 AT Command Set
13.2 AT+CSIM
s
13.2 AT+CSIM Generic SIM Access
AT+CSIM allows direct control of the SIM.
Compared to Restricted SIM Access command AT+CRSM, the definition of AT+CSIM allows the ME to take more
control over the SIM interface.
However, the SIM Application Toolkit functionality is not supported by AT+CSIM. Therefore the following SIM
commands cannot be used: TERMINAL PROFILE, ENVELOPE, FETCH and TEMINAL RESPONSE.
Syntax
Test Command
AT+CSIM=
Response(s)
OK
Write Command
AT+CSIM=,
Response(s)
+CSIM: ,
OK
ERROR
+CME ERROR:
Reference(s) PIN USB0-MDM USB0-APP Last
3GPP TS 27.007, 3GPP TS 31.102,
ETSI TS 102 221, GSM 11.11
- + + -
Parameter Description
(num)
Length of or string.
(str)
Command passed on by the ME to the SIM.
Parameter length: maximum 260 Bytes.
(str)
Response data of the command returned by the SIM.
Parameter length: maximum 257 Bytes.
Example
The following examples explain how to use AT+CSIM.
AT+CSIM=14,"A0A40000027F10"
+CSIM: 4,"9F19"
OK
AT+CSIM=14,"A0A40000026F3A"
+CSIM: 4,"9F0F"
OK
AT+CSIM=16,"A0C000000F000000"
Select DF-Telecom
Command successful, length '19' of the response
data
Select EF-ADN (Abbreviated dialling numbers)
Command successful, length '0F' of the response
data
Get Response
HC25_ATC_V01.200 Page 230 of 290 7/25/07
Confidential / Released