MikroTik RouterOS™ v2.9

Property Description
group-key-update (time; default: 5m) - how often to update group key. This parameter is used
only if the wireless card is configured as an Access Point
mode (none | static-keys-optional | static-keys-required | wpa-psk; default: none) - security mode:
• none - do not encrypt packets and do not accept encrypted packets
• static-keys-optional - if there is a static-sta-private-key set, use it. Otherwise, if the interface is
set in an AP mode, do not use encryption, if the the interface is in station mode, use encryption
if the static-transmit-key is set
• static-keys-required - encrypt all packets and accept only encrypted packets
• wpa-psk - use WPA Pre-Shared Key mode
name (name) - descriptive name for the security profile
pre-shared-key (text; default: "") - string, which is used as the WPA Pre Shared Key. It must be
the same on AP and station to communicate
radius-mac-authentication (no | yes; default: no) - whether to use Radius server for MAC
authentication
static-algo-0 (none | 40bit-wep | 104bit-wep | aes-ccm | tkip; default: none) - which encryption
algorithm to use:
• none - do not use encryption and do not accept encrypted packets
• 40bit-wep - use the 40bit encryption (also known as 64bit-wep) and accept only these packets
• 104bit-wep - use the 104bit encryption (also known as 128bit-wep) and accept only these
packets
• aes-ccm - use the AES-CCM (Advanced Encryption Standard in Counter with CBC-MAC)
encryption algorithm and accept only these packets
• tkip - use the TKIP (Temporal Key Integrity Protocol) and accept only these packets
static-algo-1 (none | 40bit-wep | 104bit-wep | aes-ccm | tkip; default: none) - which encryption
algorithm to use:
• none - do not use encryption and do not accept encrypted packets
• 40bit-wep - use the 40bit encryption (also known as 64bit-wep) and accept only these packets
• 104bit-wep - use the 104bit encryption (also known as 128bit-wep) and accept only these
packets
• aes-ccm - use the AES-CCM (Advanced Encryption Standard in Counter with CBC-MAC)
encryption algorithm and accept only these packets
• tkip - use the TKIP (Temporal Key Integrity Protocol) and accept only these packets
static-algo-2 (none | 40bit-wep | 104bit-wep | aes-ccm | tkip; default: none) - which encryption
algorithm to use:
• none - do not use encryption and do not accept encrypted packets
• 40bit-wep - use the 40bit encryption (also known as 64bit-wep) and accept only these packets
• 104bit-wep - use the 104bit encryption (also known as 128bit-wep) and accept only these
packets
• aes-ccm - use the AES-CCM (Advanced Encryption Standard in Counter with CBC-MAC)
encryption algorithm and accept only these packets
Page 246 of 615
Copyright 1999-2005, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.