MikroTik RouterOSâ¢ v2.9

More documents

Recommendations

Info

• PPP User AAA • Software Package Management Description MikroTik RouterOS router user facility manage the users connecting the router from the local console, via serial terminal, telnet, SSH or Winbox. The users are authenticated using either local database or designated RADIUS server. Each user is assigned to a user group, which denotes the rights of this user. A group policy is a combination of individual policy items. In case the user authentication is performed using RADIUS, the RADIUS client should be previously configured under the /radius submenu. Router User Groups Home menu level: /user group Description The router user groups provide a convenient way to assign different permissions and access rights to different user classes. Property Description name (name) - the name of the user group policy (multiple choice: local | telnet | ssh | ftp | reboot | read | write | policy | test | web; default: !local,!telnet,!ssh,!ftp,!reboot,!read,!write,!policy,!test,!web) - group policy item set • local - policy that grants rights to log in locally via console • telnet - policy that grants rights to log in remotely via telnet • ssh - policy that grants rights to log in remotely via secure shell protocol • ftp - policy that grants remote rights to log in remotely via FTP and to transfer files from and to the router • reboot - policy that allows rebooting the router • read - policy that grants read access to the router's configuration. All console commands that do not alter router's configuration are allowed • write - policy that grants write access to the router's configuration, except for user management. This policy does not allow to read the configuration, so make sure to enable read policy as well • policy - policy that grants user management rights. Should be used together with write policy • test - policy that grants rights to run ping, traceroute, bandwidth-test and wireless scan, sniffer and snooper commands • web - policy that grants rights to log in remotely via WebBox • winbox - policy that grants rights to log in remotely via WinBox Page 355 of 615 Copyright 1999-2005, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA. Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
• password - policy that grants rights to change the password Notes There are three system groups which cannot be deleted: [admin@rb13] > /user group print 0 name="read" policy=local,telnet,ssh,reboot,read,test,winbox,password,web,!ftp,!write,!policy 1 name="write" policy=local,telnet,ssh,reboot,read,write,test,winbox,password,web,!ftp,!policy 2 name="full" policy=local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web 3 name="test" policy=ssh,read,policy,!local,!telnet,!ftp,!reboot,!write,!test,!winbox,!password,!web [admin@rb13] > Exclamation sign '!' just before policy item name means NOT. Example To add reboot group that is allowed to reboot the router locally or using telnet, as well as read the router's configuration, enter the following command: [admin@rb13] user group> add name=reboot policy=telnet,reboot,read,local [admin@rb13] user group> print 0 name="read" policy=local,telnet,ssh,reboot,read,test,winbox,password,web,!ftp,!write,!policy 1 name="write" policy=local,telnet,ssh,reboot,read,write,test,winbox,password,web,!ftp,!policy 2 name="full" policy=local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web 3 name="reboot" policy=local,telnet,reboot,read,!ssh,!ftp,!write,!policy,!test,!winbox,!password,!web [admin@rb13] user group> Router Users Home menu level: /user Description Router user database stores the information such as username, password, allowed access addresses and group about router management personnel. Property Description address (IP address | netmask; default: 0.0.0.0/0) - host or network address from which the user is allowed to log in group (name) - name of the group the user belongs to name (name) - user name. Although it must start with an alphanumeric character, it may contain "*", "_", "." and "@" symbols Page 356 of 615 Copyright 1999-2005, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA. Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
Page 1 and 2:
MikroTik RouterOS v2.9 Reference Ma
Page 3 and 4:
General Information ...............
Page 5 and 6:
Bridge Host Monitoring.............
Page 7 and 8:
Frame Relay Configuration Examples.
Page 9 and 10:
Queue Trees........................
Page 11 and 12:
Dynamic DNS Update.................
Page 13 and 14:
Scheduler Configuration............
Page 15 and 16:
Description General Information Sum
Page 17 and 18:
Broadcom Tigon3 Chipset type: Broad
Page 19 and 20:
Chipset type: Marvell Yukon 88E80xx
Page 21 and 22:
Compatibility: • RealTek RTL8129
Page 23 and 24:
Description Atheros Chipset type: A
Page 25 and 26:
Description This is driver for lega
Page 27 and 28:
xDSL Packages required: synchronous
Page 29 and 30:
License Management Document revisio
Page 31 and 32:
Important: the abovementioned limit
Page 33 and 34:
• ERROR: You are not allowed to u
Page 35 and 36:
• NTP - Network Time Protocol ser
Page 37 and 38:
package is installed) • MAC Telne
Page 39 and 40:
Related Documents • Software Pack
Page 41 and 42:
from this type of media; if El Tori
Page 43 and 44:
etype new password: ************ [a
Page 45 and 46:
| from any level [admin@MikroTik] i
Page 47 and 48:
0 D RealTek 8139 1 D Intel EtherExp
Page 49 and 50:
when the addresses were added in th
Page 51 and 52:
y the ISP, you should use the sourc
Page 53 and 54:
Installing RouterOS with CD-Install
Page 55 and 56:
Installing RouterOS with Floppies D
Page 57 and 58:
• IP address/mask - address with
Page 59 and 60:
Configuration Management Document r
Page 61 and 62:
Description The export command prin
Page 63 and 64:
FTP (File Transfer Protocol) Server
Page 65 and 66:
MAC Level Access (Telnet and Winbox
Page 67 and 68:
Flags: X - disabled # INTERFACE 0 a
Page 69 and 70:
Description The Serial Console (man
Page 71 and 72:
Notes [Ctrl]+[Q] and [Ctrl]+[X] hav
Page 73 and 74:
License required: level1 Home menu
Page 75 and 76:
Uninstalling Command name: /system
Page 77 and 78:
10 ppp 2.9.11 11 dhcp 2.9.11 12 hot
Page 79 and 80:
To add a router with IP address 192
Page 81 and 82:
thinrouter-pcipc forces PCI-to-Card
Page 83 and 84:
Description In this submenu you can
Page 85 and 86:
SSH (Secure Shell) Server and Clien
Page 87 and 88:
Example [admin@MikroTik] > /system
Page 89 and 90:
MikroTik RouterOS implements indust
Page 91 and 92:
Common Console Functions Descriptio
Page 93 and 94:
[admin@MikroTik] interface> set 0 m
Page 95 and 96:
Description There are some commands
Page 97 and 98:
owner of safe mode is notified abou
Page 99 and 100:
where: • discovers and shows MNDP
Page 101 and 102:
IP Addresses and ARP Document revis
Page 103 and 104:
ether1 or ether2. Example [admin@Mi
Page 105 and 106:
0 10.0.0.217/24 10.0.0.0 10.0.0.255
Page 107 and 108:
OSPF Document revision 1.4 (Wed Dec
Page 109 and 110:
• if-installed-as-type-1 - send t
Page 111 and 112:
• none - do not use authenticatio
Page 113 and 114:
[admin@MikroTik] routing ospf> inte
Page 115 and 116:
OSPF backup without using a tunnel
Page 117 and 118:
# NETWORK AREA 0 10.3.0.0/24 local_
Page 119 and 120:
[admin@OSPF_peer_2] > ip route prin
Page 121 and 122:
Packages required: routing License
Page 123 and 124:
eceive (v1 | v1-2 | v2; default: v2
Page 125 and 126:
Example To view the list of the rou
Page 127 and 128:
[admin@MikroTik] routing rip> • C
Page 129 and 130:
• dynamic routes - automatically
Page 131 and 132:
Static Equal Cost Multi-Path routin
Page 133 and 134:
General Interface Settings Document
Page 135 and 136:
ARLAN 655 Wireless Client Card Docu
Page 137 and 138:
Example [admin@MikroTik] > interfac
Page 139 and 140:
Interface Bonding Document revision
Page 141 and 142:
determenation relies on the device
Page 143 and 144:
• for Office1through ISP2 [admin@
Page 145 and 146:
Bridge Document revision 2.1 (Fri M
Page 147 and 148:
• Filter Description Ethernet-lik
Page 149 and 150:
To group ether1 and ether2 in the a
Page 151 and 152:
idge1 00:C0:DF:07:5E:E6 ether1 4m46
Page 153 and 154:
• ddp - datagram delivery protoco
Page 155 and 156:
Home menu level: /interface bridge
Page 157 and 158:
action=dst-nat is selected Troubles
Page 159 and 160:
• Device Driver List • IP Addre
Page 161 and 162:
tx-antenna (both | default | left |
Page 163 and 164:
The access point is connected to th
Page 165 and 166:
• One of the units (slave) should
Page 167 and 168:
Cyclades PC300 PCI Adapters Documen
Page 169 and 170:
chdlc-keepalive (time; default: 10s
Page 171 and 172:
[admin@MikroTik] ip route> add gate
Page 173 and 174:
Additional Documents • http://www
Page 175 and 176:
ut it does not affect the NIC's per
Page 177 and 178:
Additional Documents • http://www
Page 179 and 180:
The interface should be enabled acc
Page 181 and 182:
1 1.1.1.2/32 1.1.1.1 1.1.1.1 farsyn
Page 183 and 184:
Finally we need to add IP addresses
Page 185 and 186:
• Moxa C502 Dual Port Synchronous
Page 187 and 188:
0 1.1.1.1/24 1.1.1.0 1.1.1.255 pvc1
Page 189 and 190:
Troubleshooting Description • I c
Page 191 and 192:
[admin@MikroTik] interface ppp-clie
Page 193 and 194:
Hardware usage: Not significant Rel
Page 195 and 196:
mtu (integer; default: 1500) - Maxi
Page 197 and 198:
session-timeout=0s idle-timeout=0s
Page 199 and 200:
• And finally, you have to add sc
Page 201 and 202:
Description With the introduction o
Page 203 and 204:
M3P Document revision 0.3.0 (Wed Ma
Page 205 and 206:
unpacking (none | simple | compress
Page 207 and 208:
• Log Management Description You
Page 209 and 210:
[admin@MikroTik] interface moxa-c10
Page 211 and 212:
[admin@MikroTik] ip route> print Fl
Page 213 and 214:
Flags: X - disabled, I - invalid, D
Page 215 and 216:
• Log Management Description You
Page 217 and 218:
The driver for MOXA C502 card shoul
Page 219 and 220:
The driver for MOXA C502 card shoul
Page 221 and 222:
PPP and Asynchronous Interfaces Doc
Page 223 and 224:
Example [admin@MikroTik] > /port pr
Page 225 and 226:
Example You can add a PPP client us
Page 227 and 228:
RadioLAN 5.8GHz Wireless Interface
Page 229 and 230:
default-destination (ap | as-specif
Page 231 and 232:
1. Setting the Service Set Identifi
Page 233 and 234:
Property Description Notes WDS Inte
Page 235 and 236:
Service Set Identifier test, do the
Page 237 and 238:
acceptance timeout) in microseconds
Page 239 and 240:
• manual-tx-power - channels in c
Page 241 and 242:
Notes It is strongly suggested to l
Page 243 and 244:
• none - do nothing special, do n
Page 245 and 246:
WDS cannot be used on Nstreme-dual
Page 247 and 248:
access point routeros-version (read
Page 249 and 250:
client-tx-limit (integer; default:
Page 251 and 252:
nstreme-support (read-only: yes | n
Page 253 and 254:
Property Description arp (disabled
Page 255 and 256:
Align Home menu level: /interface w
Page 257 and 258:
2412MHz 3.8% 2417MHz 9.8% 2422MHz 2
Page 259 and 260:
Property Description group-key-upda
Page 261 and 262:
Prism card doesn't report that the
Page 263 and 264:
2 2412 -45dBm@1Mbps 00:02:6F:05:68:
Page 265 and 266:
ack-timeout=dynamic tx-power=defaul
Page 267 and 268:
This example will show you how to c
Page 269 and 270:
adio-name: "000C42050022" signal-st
Page 271 and 272:
Flags: X - disabled, R - running 0
Page 273 and 274:
[admin@WEP_StationX] interface wire
Page 275 and 276:
Xpeed SDSL Interface Document revis
Page 277 and 278:
[admin@r1] interface> print Flags:
Page 279 and 280:
• I tried to connect two routers
Page 281 and 282:
2. On router with IP address 10.1.0
Page 283 and 284:
network. Example Our goal is to cre
Page 285 and 286:
IP Security Document revision 3.4 (
Page 287 and 288:
Internet Key Exchange The Internet
Page 289 and 290:
level (acquire | require | use; def
Page 291 and 292:
hash-algorithm (multiple choice: md
Page 293 and 294:
current-bytes (read-only: integer)
Page 295 and 296:
General Information MikroTik Router
Page 297 and 298:
! Create IPsec transform set - tran
Page 299 and 300:
[admin@MikroTik] > /ip ipsec policy
Page 301 and 302:
1. Add an IPIP interface (by defaul
Page 303 and 304:
[admin@MikroTik] interface ipip> pr
Page 305 and 306:
• accessing an Intranet/LAN of a
Page 307 and 308:
[admin@MikroTik] interface l2tp-cli
Page 309 and 310:
[admin@MikroTik] interface l2tp-ser
Page 311 and 312:
To route the local Intranets over t
Page 313 and 314:
On the L2TP server a user must be s
Page 315 and 316:
PPPoE Document revision 1.5 (Fri No
Page 317 and 318: License required: level1 (limited t
Page 319 and 320: Example To monitor the pppoe-out1 c
Page 321 and 322: To disconnect the user ex: [admin@M
Page 323 and 324: disconnect, they are still shown an
Page 325 and 326: • For mobile or remote clients to
Page 327 and 328: Example To set up PPTP client named
Page 329 and 330: connection mtu (integer) - (cannot
Page 331 and 332: ound-trip min/avg/max = 3/3.0/3 ms
Page 333 and 334: VLAN Document revision 1.2 (Mon Sep
Page 335 and 336: • http://www.cisco.com/warp/publi
Page 337 and 338: Graphing Document revision 1.0 (09-
Page 339 and 340: allow-address (IP address | netmask
Page 341 and 342: HotSpot User AAA Document revision
Page 343 and 344: name (name) - profile reference nam
Page 345 and 346: Example To add user ex with passwor
Page 347 and 348: IP accounting Document revision 2.1
Page 349 and 350: enabled: yes account-local-traffic:
Page 351 and 352: PPP User AAA Document revision 2.4
Page 353 and 354: was no activity present. There is n
Page 355 and 356: is the caller's number (that may or
Page 357 and 358: RADIUS client Document revision 0.4
Page 359 and 360: • ppp - Point-to-Point clients au
Page 361 and 362: address of the client) • User-Nam
Page 363 and 364: • Advertise-Interval - Time inter
Page 365 and 366: Framed-IP-Address 8 RFC2865 Framed-
Page 367: Router User AAA Document revision 2
Page 371 and 372: when (read-only: date) - log in dat
Page 373 and 374: information included • version 9
Page 375 and 376: Bandwidth Control Document revision
Page 377 and 378: disciplines are set under /queue in
Page 379 and 380: picture, Leaf1 will be served only
Page 381 and 382: PFIFO and BFIFO These queuing disci
Page 383 and 384: Interface Default Queues Home menu
Page 385 and 386: Home menu level: /queue tree Descri
Page 387 and 388: upload to the Server and Workstatio
Page 389 and 390: Filter Document revision 2.7 (Fri N
Page 391 and 392: • packet arrival time • and muc
Page 393 and 394: connection-type (ftp | gre | h323 |
Page 395 and 396: ipsec-esp | iso-tp4 | ospf | pup |
Page 397 and 398: add chain=forward src-address=0.0.0
Page 399 and 400: The address list records could be u
Page 401 and 402: Mangle Home menu level: /ip firewal
Page 403 and 404: hotspot (multiple choice: from-clie
Page 405 and 406: coming from the same host to be tre
Page 407 and 408: Change MSS It is a well known fact
Page 409 and 410: NAT Description Network Address Tra
Page 411 and 412: chain (dstnat | srcnat | name) - sp
Page 413 and 414: out-interface (name) - interface th
Page 415 and 416: Example of Destination NAT If you w
Page 417 and 418: Packet Flow Description MikroTik Ro
Page 419 and 420:
Property Description connection-mar
Page 421 and 422:
Description ICMP TYPE:CODE values I
Page 423 and 424:
DHCP Client and Server Document rev
Page 425 and 426:
Flags: X - disabled, I - invalid 0
Page 427 and 428:
DHCP Server Setup Home menu level:
Page 429 and 430:
DHCP lease in case it is directly r
Page 431 and 432:
6. in other case, the lease becomes
Page 433 and 434:
Description To find any rogue DHCP
Page 435 and 436:
• 0.0.0.0 - the IP address will b
Page 437 and 438:
IP addresses of DHCP-Relay: [admin@
Page 439 and 440:
DNS Client and Cache Document revis
Page 441 and 442:
secondary-dns: 0.0.0.0 allow-remote
Page 443 and 444:
HotSpot Gateway Document revision 4
Page 445 and 446:
for that interface: /ip hotspot add
Page 447 and 448:
You may wish not to require authori
Page 449 and 450:
While client is blocked, FTP and ot
Page 451 and 452:
set up in the server profile, and a
Page 453 and 454:
split-user-domain (yes | no; defaul
Page 455 and 456:
• deny - the authorization is req
Page 457 and 458:
• bypassed - perform the translat
Page 459 and 460:
NAT rules From /ip firewall nat pri
Page 461 and 462:
finished session • error.html - e
Page 463 and 464:
• link-login - link to login page
Page 465 and 466:
Notes If you want to use HTTP-CHAP
Page 467 and 468:
• Hotspot will ask RADIUS server
Page 469 and 470:
that they will have login-free acce
Page 471 and 472:
[admin@MikroTik] ip proxy> print en
Page 473 and 474:
path (wildcard) - name of the reque
Page 475 and 476:
esponse may be used to update previ
Page 477 and 478:
Description IP pools simply group I
Page 479 and 480:
SOCKS Proxy Server Document revisio
Page 481 and 482:
Access List Home menu level: /ip so
Page 483 and 484:
client. In this case IP address wou
Page 485 and 486:
IP address on it, and as many inter
Page 487 and 488:
Web Proxy Document revision 1.1 (We
Page 489 and 490:
Note that it may be useful to have
Page 491 and 492:
Description Access list is implemen
Page 493 and 494:
src-address (IP address | netmask)
Page 495 and 496:
This method retrieves whatever info
Page 497 and 498:
Certificate Management Document rev
Page 499 and 500:
decrypt - decrypt and cache public
Page 501 and 502:
DDNS Update Tool Document revision
Page 503 and 504:
GPS Synchronization Document revisi
Page 505 and 506:
[admin@MikroTik] system gps> print
Page 507 and 508:
Description How to Connect PowerTip
Page 509 and 510:
contrast: 0 [admin@MikroTik] system
Page 511 and 512:
MNDP Document revision 1.4 (Fri Mar
Page 513 and 514:
Description This submenu allows you
Page 515 and 516:
MikroTik RouterOS provides both - N
Page 517 and 518:
Home menu level: /system clock Note
Page 519 and 520:
• Health monitoring (RouterBOARD
Page 521 and 522:
• optimal - the BIOS tries to det
Page 523 and 524:
led3 (yes | no; default: no) - whet
Page 525 and 526:
Support Output File Document revisi
Page 527 and 528:
Command Description Notes Example S
Page 529 and 530:
0xCF8-0xCFF [PCI conf1] 0x4000-0x40
Page 531 and 532:
Only users, which are members of gr
Page 533 and 534:
Home menu level: Command name: /sys
Page 535 and 536:
Bandwidth Test Document revision 1.
Page 537 and 538:
[admin@MikroTik] tool bandwidth-ser
Page 539 and 540:
ICMP Bandwidth Test Document revisi
Page 541 and 542:
Packet Sniffer Document revision 1.
Page 543 and 544:
filter-address1 and filter-address2
Page 545 and 546:
• ospf - Open Shortest Path First
Page 547 and 548:
Packet Sniffer Host Home menu level
Page 549 and 550:
Ping Document revision 1 (Mon Jul 1
Page 551 and 552:
and press the [Tab] key: [admin@Mik
Page 553 and 554:
interface (name) - the name of the
Page 555 and 556:
Traceroute Document revision 1.8 (F
Page 557 and 558:
Network Monitor Document revision 1
Page 559 and 560:
done There are two scripts. The scr
Page 561 and 562:
eboot and on most item configuratio
Page 563 and 564:
Scripting Host Document revision 2.
Page 565 and 566:
Console commands are made of the fo
Page 567 and 568:
Variables Description RouterOS scri
Page 569 and 570:
= - greater or equal. Binary operat
Page 571 and 572:
[admin@MikroTik] interface> :put (1
Page 573 and 574:
epeatedly (yes | no) - condition, w
Page 575 and 576:
• omitted - altar LED state forev
Page 577 and 578:
3 4 5 6 7 8 9 [admin@MikroTik] > Sp
Page 579 and 580:
policy (multiple choice: ftp | loca
Page 581 and 582:
Command Description edit (name) - o
Page 583 and 584:
interval (time; default: 0s) - inte
Page 585 and 586:
Traffic Monitor Document revision 1
Page 587 and 588:
IP Telephony Document revision 2.2
Page 589 and 590:
Description IP telephony, known as
Page 591 and 592:
If autodial does not exactly match
Page 593 and 594:
name (name) - name given by the use
Page 595 and 596:
ing-cadence (text) - a 16-symbol ri
Page 597 and 598:
number of packets received by this
Page 599 and 600:
There is a possibility to enter som
Page 601 and 602:
ZZ • If nr=444, it matches the re
Page 603 and 604:
To generate a tone, frequency and c
Page 605 and 606:
• 10 - Call failed as could not f
Page 607 and 608:
0 11 phonejack1 1 _ voip1 [admin@Mi
Page 609 and 610:
Setting up the MikroTik IP Telephon
Page 611 and 612:
# DST-PATTERN VOICE-PORT PREFIX 0 3
Page 613 and 614:
• G.729a codec MUST be disabled (
Page 615 and 616:
We want to be able to use make call
Page 617 and 618:
no-ping-delay (time; default: 5m) -
Page 619 and 620:
Packages required: ups License requ
Page 621 and 622:
Notes The test begins only if the b
Page 623 and 624:
VRRP Document revision 1.4 (Fri Mar
Page 625 and 626:
advertisement packets • none - no
Page 627 and 628:
This example shows how to configure
show all

MikroTik RouterOSâ¢ v2.9

Create successful ePaper yourself

Delete template?

Save as template?

MikroTik RouterOSâ¢ v2.9