05.01.2015 Views

MikroTik RouterOS™ v2.9

MikroTik RouterOS™ v2.9

MikroTik RouterOS™ v2.9

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Prism card doesn't report that the use of WEP is required for all data type frames, which means that<br />

some clients will not see that access point uses encryption and will not be able to connect to such<br />

AP. This is a Prism hardware problem and can not be fixed. Use Atheros-based cards (instead of<br />

Prism) on APs if you want to provide WEP in your wireless network.<br />

Sniffer<br />

Home menu level: /interface wireless sniffer<br />

Description<br />

With wireless sniffer you can sniff packets from wireless networks.<br />

Property Description<br />

channel-time (time; default: 200ms) - how long to sniff each channel, if multiple-channels is set to<br />

yes<br />

file-limit (integer; default: 10) - limits file-name's file size (measured in kilobytes)<br />

file-name (text; default: "") - name of the file where to save packets in PCAP format. If file-name<br />

is not defined, packets are not saved into a file<br />

memory-limit (integer; default: 1000) - how much memory to use (in kilobytes) for sniffed packets<br />

multiple-channels (yes | no; default: no) - whether to sniff multiple channels or a single channel<br />

• no - wireless sniffer sniffs only one channel in frequency that is configured in /interface<br />

wireless<br />

• yes - sniff in all channels that are listed in the scan-list in /interface wireless<br />

only-headers (yes | no; default: no) - sniff only wireless packet heders<br />

receive-errors (yes | no; default: no) - whether to receive packets with CRC errors<br />

streaming-enabled (yes | no; default: no) - whether to send packets to server in TZSP format<br />

streaming-max-rate (integer; default: 0) - how many packets per second the router will accept<br />

• 0 - no packet per second limitation<br />

streaming-server (IP address; default: 0.0.0.0) - streaming server's IP address<br />

Sniffer Sniff<br />

Home menu level: /interface wireless sniffer sniff<br />

Description<br />

Wireless Sniffer Sniffs packets<br />

Property Description<br />

file-over-limit-packets (read-only: integer) - how many packets are dropped because of exceeding<br />

file-limit<br />

file-saved-packets (read-only: integer) - number of packets saved to file<br />

Page 248 of 615<br />

Copyright 1999-2005, <strong>MikroTik</strong>. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.<br />

Other trademarks and registred trademarks mentioned herein are properties of their respective owners.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!