SAILOR 500/250 FleetBroadband

Chapter 3: Operating the system
The IP handset
When you connect the Thrane & Thrane IP handset to one of the LAN (PoE)
connectors on the terminal you can use the handset display and keypad to
enter the PIN or to view the status of the terminal.
The IP handset includes the following items for the terminal:
• Viewing C/No (signal strength) and UMTS status (“Ready”, “Registering”
etc.) for the SAILOR FleetBroadband system
• Entering the PIN and PUK for the terminal
• Inclusion of the terminal phone book (not editable) in the IP handset
Contacts.
For further information on the IP handset, see the user manual for the IP
handset.
The web interface of the terminal
The web interface is a built-in web server for setting up and controlling the
terminal, using a connected computer with a browser. No installation of
software is required.
With the web interface you can access the same settings as with the IP
handset, and additionally:
• edit the phone book
• view properties of the terminal and antenna
• set up the interfaces of the terminal
• upload software
With an administrator password you can also:
• set up user rights
• set up network user groups
For information on how to use the web interface, see Using the web interface
on page 53.
32 General