1 - Audio Intervisual Design, Inc.

More documents

Recommendations

Info

3-4 T HE S ONIC HD3 I/O BOX Name Description Operating Location Stay out of the box User-serviceable parts Do not operate the equipment under any of the following conditions: explosive atmospheres, in wet locations, in inclement weather, using improper or unknown AC mains voltages, using improper fuses. To avoid personal injury or possibly fatal shocks, always keep all covers and panels on the equipment. Always operate the product with the covers and panels properly installed. There are no user-serviceable parts inside the Sonic HD3. In case of failure, contact Sonic customer support.
F RONT-PANEL I NDICATORS 3-5 Front-Panel Indicators The HD3 front panel incorporates a number of LED indicators that display input and output signal status. S O N I C Multi-Channel Digital I/O Conversion System Sonic Port Dual AES Clock Source In Out In Out In Out In Out In Out In Out In Out In Out SOLUTIONS A B C D InOut 192176.49688.24844.1WSDS1-23-4 JA Lock 1 2 3 4 5 6 7 8 Sonic I/O Port Status Indicators Dual AES Input/Output Clock Speed Indicators Figure 3-2 Clock Source Indicators Jitter Attenuation Lock Indicator The HD3 Front Panel Word Sync Lock Indicator <strong>Audio</strong> Input & Output Status Indicators • Sonic I/O Port — This set of four indicators displays which SonicStudio I/O port is selected. The LED corresponding to the active port glows green; if all four LEDs are off, the HD3 is disabled. Port A is the default, B is optional and the other two are not currently supported. • Dual AES Input & Output — These two LEDs indicate the input and output AES clock speed. The indicator glows green if you are using 1x AES, and is off if you are using double-speed. • Clock Source — The indicator which is lit denotes the source from which digital clock is derived. If the indicated clock source is not the master, then the DS (digital sync) indicator will light. The last two LEDs at the right glow green for channels 1-2/3-4 and amber for 5-6/7-8. • JA — When the jitter attenuation circuit is locked to the clock source, this indicator glows green. If it is red, the circuit is not locked and audio outputs will mute. • Word Sync Lock — This indicator glows green if the HD3 is locked to an input word sync signal, and amber if it is not locked. If there is no signal at the word sync input, the indicator is off. • <strong>Audio</strong> In & Out Status — For each individual audio channel, a pair of LEDs indicates signal status. When the indicator is green, signal is present. Intensity corresponds to signal level; red indicates clipping.
Page 2 and 3: ©2002 SonicStudio. All rights rese
Page 4 and 5: IV T ABLE OF C ONTENTS Overview of
Page 6 and 7: VI Related Documents Please refer t
Page 8 and 9: VIII keyfile. Warning! Before you a
Page 10 and 11: 1-2 HD-1000 WORKSTATION What’s In
Page 12 and 13: 1-4 HD-1000 WORKSTATION System Requ
Page 14 and 15: 1-6 HD-1000 WORKSTATION Installing
Page 16 and 17: 1-8 HD-1000 WORKSTATION SCSI Bus Co
Page 18 and 19: 1-10 HD-1000 WORKSTATION 4 Using th
Page 20 and 21: 1-12 HD-1000 WORKSTATION To connect
Page 22 and 23: 1-14 HD-1000 WORKSTATION 2 Connect
Page 24 and 25: 2-2 S OFTWARE I NSTALLATION/DRIVE S
Page 32 and 33: 3-2 T HE S ONIC HD3 I/O BOX Overvie
Page 36 and 37: 3-6 T HE S ONIC HD3 I/O BOX Rear-Pa
Page 38 and 39: 3-8 T HE S ONIC HD3 I/O BOX AES/EBU
Page 40 and 41: 3-10 THE S ONIC HD3 I/O BOX If you
Page 42 and 43: 3-12 THE S ONIC HD3 I/O BOX This di
Page 44 and 45: 3-14 THE S ONIC HD3 I/O BOX The HD3
Page 46 and 47: 3-16 THE S ONIC HD3 I/O BOX OUTPUT
Page 48 and 49: 3-18 THE S ONIC HD3 I/O BOX
Page 50 and 51: A-2 C ONNECTOR W IRING HD3 Connecti
Page 52 and 53: A-4 C ONNECTOR W IRING
Page 54 and 55: FCC Statement This device complies
Page 56 and 57: Declaration of Conformity Applicati
Page 58: I-2 INDEX I formats 3-2, 3-7, 3-8 s

1 - Audio Intervisual Design, Inc.

Create successful ePaper yourself

Delete template?

Save as template?