Download the full catalog - Schaff Piano Supply Co.

SCHAFF TUNING
LEVER HEADS
These high polished stainless steel heads will fit any Schaff
made tuning lever, and come in a variety of lengths and
pitch angles as shown below.
No. 13F - 7/8” long, 15˚ Head. Each
No. 13G - 1-1/4” long, 5˚ Head. Each
No. 13G-10 - 1-1/4” long, 10˚ Head. Each
No. 13G-15 - 1-1/4” long, 15˚ Head. Each
No. 13H - 1-3/4” long, 5˚ Head. Each
No. 13H-15 - 1-3/4” long, 15˚ Head. Each
No. 13J - 2-1/4” long, 5˚ Head. Each
No. 13K - 3” long, 5˚ Head. Each
No. 13L - 5” long, 5˚ Head. Each
SCHAFF TUNING LEVER TIPS
Made from high-quality, chrome plated tool steel, these tips
are 1” in length and will fit any Schaff No. 13 Series Head.
No. 14A - #1 Star Tip. Each
No. 14B - #2 Star Tip. Each
No. 14C - #3 Star Tip. Each
No. 14G - #4 Star Tip. Each
34
TUNING LEVER ACCESSORIES
No. 15 - Square Tip. Each
Length
No. 3128 - Oblong Tuning Lever Tip. Each
TUNING TIPS FOR PIANO FACTORY LEVER AND ADAPTER
These tuning tips can be used on either the No. 18 Lever or
the No. 18A Adapter.
No. 14D - #2 Piano Factory Star Tip. Each
No. 14E - Piano Factory Square Tip. Each
No. 14F - #3 Piano Factory Star Tip. Each
PIANO FACTORY HEAD AND TIP ADAPTER
This combination head and tip can be
installed on any Schaff tuning lever. This
extra strength tip is ideal for restringing.
Tip can be changed out for replacement.
Measuring 2-1/2” long. Standard No. 14D
#2 star tip included.
No. 18A - Piano Factory Head and Tip Adapter. Each
FENDON NARROW WALL TUNING TIP
As developed by Schaff and Tom Fendon,
this item is now an industry standard. The
Fendon Tip is used when tuning pins are very close together
(generally in small pianos), and a conventional tip is too
large. Remember, this tip is not designed to take the stress
for high tension notes in the piano’s bass and tenor sections.
Our chrome plated tuning tip will fit any Schaff lever, is 2-
1/2” long and has a #2 star tip.
No. 17N - Fendon Narrow Wall Tuning Tip. Each
Length
SCHAFF ONE PIECE
TUNING LEVER
HEADS AND TIPS
These professional looking, chrome plated heads and tips are
made from tool steel, and will fit all Schaff tuning levers.
Available in various lengths, star head sizes and pitch angles
as shown below.
No. 17 - 2-1/2” Long, #2 Star Head, 5° Pitch Angle. Each
No. 17-3 - 2-1/2” Long, #3 Star Head, 5° Pitch Angle. Each
No. 17-15 - 2-1/2” Long, #2 Star Head, 15° Pitch Angle. Each
No. 17A - 1-1/2” Long, #2 Star Head, 15° Pitch Angle. Each
No. 17B - 4” Long, #2 Star Head, 5° Pitch Angle. Each
No. 17C - 5” Long, #2 Star Head, 5° Pitch Angle. Each
NARROW WALL TUNING LEVER TIP
Used when tuning pins are very close
together. Has a #2 star tip and will fit
any Schaff No. 13 series head.
No. 14H - Tip 1-1/2” long. Each
EXTRA LONG STAR TIP
No. 2 star tip 2-1/2” long.
No. 3130 - Extra Long Star Tip. Each
TIP ADAPTER
Screws into all tips. Square end fits into
star tip. Enables the technician to quickly
change tip to gain height over bearing bars,
or to reach inaccessible locations.
No. 3131 - Tip Adapter. Each
SLENDER NO. 2 EXTENSION TIP
Change quickly to a 1/2” dia. No. 2 tip.
Simply insert this slender extension into
the tip already on your lever.
No. 3129 - Slender No. 2 Extension Tip. Each
TUNING LEVER TIP WRENCH
A necessity for tightening or
removing Schaff star or square tips from
their heads. Wrench is 4-1/2” long.
No. 11 - Tuning Lever Tip Wrench. Each
OBLONG TUNING LEVER TIP
This is an adapter tip to be used on older or
square grand pianos that have oblong tuning
pins. The square chucked end fits into the star tip of any
tuning lever. 1-3/4” long, chrome plated.
No. 24 - Oblong Tuning Lever Tip. Each