Download the full catalog - Schaff Piano Supply Co.

SCHAFF TOOL AND SERVICE KITS
Our constant aim is to find more ways to better serve our customers. The following kits of tools have been specially selected as a
“starter kit” in several repair areas of piano work. These kits are intended to assist our customer in selecting tools for an area of
work in which they have had no previous experience. All of the kits below have been priced below the cost of purchasing the
individual tools, therefore, we cannot allow substitution.
#1 BASIC TUNING KIT
Includes:
No. 7 - Tuning Lever. 1 ea.
No. 2111 - Tuning Fork C-523.3. 1 ea.
No. 209 - Temperament Strip. 1 ea.
No. 202 - Mutes. 2 ea.
No. 203 - Mutes. 2 ea.
No. 205 - Mutes. 4 ea.
#5 REGULATING TOOL KIT
Includes 1 each of the following:
No. 26 - Combination Tool Handle.
No. 31C - Screw Driver, 8” long.
No. 32C - Screw Driver, 8” long.
No. 67A - Regulating Screwdriver, 7” long.
No. 61A - Damper Regulator, Offset Angle.
No. 85 - Spoon Bender.
No. 464 - Offset Key Spacer.
No. 472 - Bent Back Check Regulator.
#2 STRINGING KIT
Includes 1 each of the following:
No. 106 - Bearing Check Gauge.
No. 132 - String Stretcher.
No. 109 - Tuning Pin Crank.
No. 108 - Tuning Pin Setter.
No. 110 - Tuning Pin Extractor.
No. 174A - Tuning Pin Punch.
No. 134 - Combination String
Spacer & Lifter.
No. 171 - Coil Setter-Tightener.
No. 225B - Piano Wire Cutters.
No. 341 - Center & Tuning Pin Gauge.
No. 342 - Music Wire Gauge.
#6 HAMMER REPLACEMENT KIT
Includes:
No. 76A - High Speed Drill. 1 ea.
No. 103B - Felt Picker. 1 ea.
No. 218 - Sandpaper File. 1 ea.
No. 130A - Extractor. 1 ea.
No. 130B - Clamp. 1 ea.
No. 75 - Shank Reducer. 1 ea.
No. 113 - Smoothing Iron. 1 ea.
No. 3506 - Hammer Shank Repair Sleeves.
1 dz.
No. 499-2 - Hammer Head Solidifier. 1 ea.
No. 237 - Hammer Shank Nippers. 1 ea.
No. 504 - Upright Hammer Shanks. 1 doz.
No. 3716 - Spinet Hammer Shanks. 1 doz.
#3 MUSIC WIRE ASSORTMENT KIT
Includes:
Twelve 1/3 lb. coils of Röslau piano
wire without brake.
Available in the following gauges:
1 coil each of #13, 13-1/2, 14, 14-1/2,
15, 15-1/2, 16, 16-1/2, 17, 18, 19, 20
#8 MASTER TOOL KIT
Includes 1 each of the following:
No. 874 - 8" Screw Holder
No. 127 - Jack Spring Hole Reamer
No. 196 - Grand Hammer Butt Spacer
No. 158 - Punching Lifter
No. 33A - Phillips Screwdriver, 8" long.
No. 38 - Phillips Screwdriver 5" long.
No. 31C - Screwdriver Blade 8" long.
No. 32C - Screwdriver Blade 8" long.
No. 464 - Offset Key Spacer
No. 67A - Regulating Screwdriver 7" long.
No. 61A - Damper Regulator
No. 61B - Straight Damper Regulator
No. 61C - Right Angle Damper Regulator
No. 4105 - Grand Screwdriver 5" long.
No. 4106 - Kimball Screwdriver 8" long.
No. 4102 - Grand Drop Screw Regulator
5" long.
No. 472 - Bent Backcheck Regulator
No. 85 - Spoon Bender
No. 97 - Steinway Capstan Regulator
No. 34 - Flange Screwdriver
No. 91C - Grand Spring Adjuster
No. 37 - Grand Screwdriver, 8" long.
39