Download the full catalog - Schaff Piano Supply Co.
Download the full catalog - Schaff Piano Supply Co.
Download the full catalog - Schaff Piano Supply Co.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
40<br />
REGULATING TOOLS<br />
COMBINATION TOOL HANDLE<br />
A space and weight saving, multi-purpose handle that fits <strong>the</strong><br />
entire set of regulating tools. Tools are secured and released<br />
by slight turn of compressing nut. Octagon plastic handle,<br />
overall tool length is 5”.<br />
No. 26 - <strong>Co</strong>mbination Handle. Each<br />
ROSEWOOD COMBINATION TOOL HANDLE<br />
Similar to our No. 26 <strong>Co</strong>mbination Tool handle, but rosewood.<br />
No. 3152 - Rosewood <strong>Co</strong>mbination Tool Handle. Each<br />
BENT BACK CHECK REGULATOR<br />
Used to bend ei<strong>the</strong>r back check or bridle wire in any<br />
direction; shaped so it can be used without taking out <strong>the</strong><br />
nameboard. Tool is 5” long and nickel plated.<br />
No. 472 - Back Check Regulator. Each<br />
OFFSET KEY SPACER<br />
The offset in this tool makes it easy to reach past <strong>the</strong> front<br />
row of key pins when twisting or bending pins under <strong>the</strong><br />
sharp keys. 6” long, chrome plated.<br />
No. 464 - Offset Key Spacer. Each<br />
KEY SPACER<br />
The tool is used for regulating key pins.<br />
Chrome plated.<br />
No. 59B - Key Spacer, 9” long. Each<br />
DOUBLE HEAD SCREWDRIVER<br />
Tool is 5” long and chrome plated. Both blades<br />
are 5/16” wide.<br />
No. 73 - Screwdriver. Each<br />
3 WAY DAMPER REGULATOR<br />
New style, with right angle, 45 degrees, and straight,<br />
incorporated into one convenient tool. With wood handle<br />
attached.<br />
No. 3146 - 3 Way Damper Regulator. Each<br />
3 WAY DAMPER REGULATOR<br />
Same as No. 3146, but for combination handle.<br />
No. 3147 - 3 Way Damper Regulator. Each<br />
DAMPER REGULATORS<br />
Used by inserting between <strong>the</strong> hammer shanks several notes<br />
away from <strong>the</strong> one to be adjusted. Wire can be bent forward,<br />
backward, or to <strong>the</strong> side, as required. Chrome plated.<br />
No. 61A - Offset Angle, 7” long. Each<br />
No. 61B - Straight, 7” long. Each<br />
No. 61C - Right Angle, 7” long. Each<br />
HAMMER SHANK REDUCER<br />
Used to remove glue, and reduce size of hammer shanks to<br />
fit new hammer heads exactly. Slight turn of nut adjusts size<br />
to within 1/100 of an inch. Tool is 2-3/4” long, nickel plated.<br />
No. 75 - Hammer Shank Reducer. Each<br />
ACTION REGULATOR<br />
A back check and bridle wire bending tool that is straight<br />
with an overall length of 8”. Chrome plated.<br />
No. 96 - Action Regulator. Each<br />
KIMBALL SCREWDRIVER<br />
Designed for Kimball damper lever screws. Tool is 8” long<br />
with both <strong>the</strong> shank diameter and blade width being 1/8”.<br />
Polished steel.<br />
No. 4106 - Kimball Screwdriver. Each<br />
SLOTTED SCREWDRIVER<br />
This chrome plated screwdriver has 1/4” diameter shank and<br />
5/16” wide blade.<br />
No. 31C - Screwdriver, 8” long. Each
Change language