Download the full catalog - Schaff Piano Supply Co.
Download the full catalog - Schaff Piano Supply Co.
Download the full catalog - Schaff Piano Supply Co.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
82<br />
SHOP TOOLS<br />
15-IN-ONE RATCHET SCREWDRIVER<br />
A slight turn of <strong>the</strong> spring-loaded bit selector knob opens <strong>the</strong><br />
chamber for easy access and storage- making <strong>the</strong> exchange of<br />
bits a snap. A must for every technician. 8” overall length.<br />
No. 3271 - Ratchet Screwdriver. Each<br />
4-IN-1 SCREWDRIVER<br />
This screwdriver has two reversible double bits - one has<br />
3/16” and 5/16” slotted blades, <strong>the</strong> o<strong>the</strong>r has #1 and #2<br />
phillips blades. Both bits snap into a reversible hex<br />
shank that is inserted into a tenite plastic handle. Overall<br />
length is 7-1/2”.<br />
No. 41 - 4-In-1 Screwdriver. Each<br />
3 PIECE SCREWHOLDING SET<br />
One kit solves all of your screw holding, starting and driving<br />
problems. 1/8”, 3/16” and 1/4” slotted blades.<br />
No. 4028 - 3 Piece Screwholding Set. Each<br />
PHILLIPS SCREWHOLDER<br />
This 9” long aluminum shaft screw holder is designed to start<br />
or retrieve any cross slot screw. Will fit any size phillips<br />
screw. Not made for driving screws.<br />
No. 4029 - Phillips Screwholder. Each<br />
SLOTTED BLADE SCREWHOLDER<br />
Measuring 9-1/2” long with a 3/16” wide slotted blade,<br />
this screwholder holds, starts and drives screws in<br />
awkward, hard-to-reach places.<br />
No. 4030 - Slotted Blade Screwholder. Each<br />
SLOTTED SCREW STARTER<br />
A spring tension chuck end holds any slotted screw from No.<br />
3 to 7/16” wide. Being only 5” long and made of aluminum,<br />
this tool is perfect for your tool case.<br />
No. 4037 - Slotted Screw Starter. Each<br />
PHILLIPS SCREW STARTER<br />
Ano<strong>the</strong>r small, lightweight tool for your traveling case.<br />
Spring steel chuck holds sizes No. 6 to 1/4” phillips<br />
screws. Made of aluminum. 5” long.<br />
No. 4038 - Phillips Screw Starter. Each<br />
PHILLIPS BLADES RATCHET OFFSET SCREWDRIVER<br />
A handy tool box screwdriver for hard to reach screws<br />
where leverage is required. Ratchet adjusts for forward<br />
or reverse position. Tool has both #1 and #2 phillips<br />
blades and is 4” long.<br />
No. 4036 - Phillips Ratchet Offset Screwdriver. Each<br />
SLOTTED BLADES RATCHET OFFSET SCREWDRIVER<br />
This is <strong>the</strong> same tool as No. 4036 listed above, except for <strong>the</strong><br />
slotted blades measuring 1/4” and 3/8” wide.<br />
No. 4035 - Slotted Ratchet Offset Screwdriver. Each
Change language