Download the full catalog - Schaff Piano Supply Co.

LARGE SLOTTED SCREWDRIVER
A slotted screwdriver with a squared end to fit into any
tuning lever tip. 3/8” wide blade is useful for tightening plate
screws. 4-1/4” long, made of tool steel.
No. 878 - Large Blade Screwdriver. Each
LARGE PHILLIPS SCREWDRIVER
A No. 4 phillips screwdriver with a squared end to fit into
any tuning lever tip. Good for tightening plate screws. 4-
1/4” long, made of tool steel.
No. 879 - Large Phillips Screwdriver. Each
SCREWDRIVER ATTACHMENTS
A unique and compact approach to having extra large
screwdriver blades readily available. One end fits any
tuning lever tip, and the other accepts the four large
screwdriver tips. Included are 5/16” and 1/2” slotted
blades and a No. 2 and No. 4 phillips blade. The 2” long
chuck holder is nickel plated, the screwdriver blades are
black oxide.
No. 68 - Screwdriver Attachments. Each
48
TECHNICIAN’S TOOLS
KEY BUSHING WEDGE CLAMP
Made from zinc plated spring steel, this new style clamp
allows for faster and more professional looking rebushing
jobs. Can be used on both the center and front key bushing.
Clamp is 1-3/4” high.
No. 151 - Key Bushing Wedge Clamp. Each
HAMMER HEAD AND BUTT EXTRACTOR
Both extractors are used to remove either the hammer head or
butt from the hammer shank. The screw type mechanism
exerts even pressure to prevent damage. The beveled plate
with adjusting nut is used on hammer heads set at an angle.
The regular upright extractor can be used on all shanks
measuring greater than 3-1/4” long, whereas the spinet
extractor can accommodate a shank distance only 2-3/4”
long. Both tools are nickel plated.
No. 130A - Upright Extractor. Each
No. 130AS - Spinet Extractor. Each
CLAMP
Whenever a hammer shank is broken, this clamp is to be
used with either No. 130A or No. 130AS Extractor. Clamp is
1-1/2” long and
nickel plated.
No. 130B - Clamp. Each
VISE GRIP SHANK CLAMP
Another Schaff multi-purpose tool that was developed with
the help of a fellow piano technician. This is a great tool for a
compact tool case. Used as a hammer shank clamp, the vise
grip action saves time as compared to the hand screw type.
Overall length 5-1/2”, nickel plated.
No. 130VG - Vise Grip Shank Clamp. Each
GRAND SHANK PRESS
Measuring 3-1/2” in overall length, this tool removes grand
piano hammer heads by pressing the shank through the
hammer heads. The base is a polished brass casting, the
screw is nickel plated.
No. 131 - Grand Shank Press. Each
HAMMER SHANK MITER BOX
An excellent tool to repair broken, upright and grand,
hammer shanks. Shank is spliced where break occurs, thus
saving the hammer assembly. Furnished with instructions.
No. 3116 - Hammer Shank Miter Box. Each